Well hello all
So this has come to some conclusion
My friend socketed the IC's the snap clicks on to for extra height
The ROMinmator is directly on the board with pins, no ROM socket
Now it fits with Kero's rominator
But, i cannot start from a 6.0.8 system anymore;)
Not from ROMinator, also...
Hello all fellow Mac tinkerers
I have this M5126, freshly recapped, board is very clean.
The symptoms are as follows
No chime
Striped display - also when tested with another display
Any idea where to start??
Greetings!!
Sorry to dig up this old topic
I have exactly the same issue, presumably by the same cause, wrong cable by previous owner
Any news on this 341-0222B copy or clone?
Hello all,
i have 4x m0110b keyboard for my 128/512k's
3 of them work, 1 does nothing at all
The ones that work however, type all the lower characters 1 character to the right
e.g.:
x is c
n is m
m is ,
et cetera.
the space bar does not even seem to work, and the return key gives a \
I was...
Well apart from the connections you would have issues getting the display flush in the case because the CC screen is curved trinitron of course, not like the old Clinton’s
Edit i only see now that you wanted to 3D print case 😁
are the backlit M5126 less prone to this? i have two of these and luckily they are fine (knock on wood)
i tried fiddling with a screwdriver around the drivers, and i can make the stripe change colour from off- to on..
it's very strange indeed
so this is going to be a parts donor :(
ordered a few PCBs from JLCPCB so keep you guys posted if this will work ;)
I see that this design uses single gate SN74AHCT1G04 instead of quad SNx4HCT02 like in the current BMOW/Kero version, don't know exactly but with my limited electronics knowledge i'd say because this design only has the...
Anybody tried this?
I run in exactly the same issue with dove macsnap 524 in a 512k with rominator from Kero
It just doesn't fit together
Maybe someone knows if Stephans' Betterbit version fits?