Recent content by Hellion

Yep it seems like it, after a bit of struggle I got the right update file over to the 4400 and now it seems to work as it should! Will be interesting to see what hickups I will run into with this, as you say, not actually supported setup. Thanks!

I had that one laying around, I just struggled with getting it from my Win10 machine to the 4400. I do this for fun from time to time, so I do forget in between all the steps that are required to do such things. :) Anyway, I finally managed to get the update over to the 4400 and install it...

No worries, I'm happy for all contributions. :-) I burned the CD anyway and it had a lot of other useful stuff so it might be handy anyway.

That would probably work on this computer, however that CD contains an english system and my goal here is to get the swedish systems on the computer. I managed to get 7.6 there, but I need the swedish 7.6.1 update as well as updating it with an english version will screw up the system folder. I...

It does not, and not when booting from the partition with the english System 7.5.3 or the one with swedish 8.6 either. It only does it when booting this "modified" version of 7.6. I'm currently trying to get the 7.6.1 update on there to see if it changes something!

I did this with System 7.6 and it worked great! I tried this earlier and then the system would not even try to install, but I guess I might have used a bad CD or something like that. Many thanks! The only thing that seems to be an issue, is this little square of noise that appears around the...

My plan was different systems on the partitions. 7.5.3 since it's my "childhood system", 7.6.1 since it's the most evolved of the 7 series, and 8.6 to get the latest system that I was interested in (perhaps 9.1 as well but I have very little relations to it.) I realized this, that 8.5 does not...

Cheers, I got hold of a PM4400 recently and since it was missing the HDD, I installed a SD card adapter instead. I partitioned the drive to eight partitions and wanted to install different systems on them, but then I ran in to the problems with this machines compatibility. I have an install CD...

Accordning to 'mmu_man', that is a video connector for passing through signals from a PDS card. Source: https://68kmla.org/bb/index.php?threads/reverse-engineering-the-macintosh-lc-iii-logicboard.38814/

Thanks for a brilliant thread. As you, I have missed info on restoring these PSUs. There are more than enough on the pizza box LCs supplys but these ones seem to be a bit forgotten! I have a dead Astec that I replaced the caps on (and one that I haven't touched yet), it then powered up the...

Hi, sorry late answer. The R43 resistor in my Astec AA19300 is rated at 220 ohm. (Red, red, brown, gold).