Recent content by fegos

i finally made it work. 3.86 for 81 and 3.83 for 7.6 and 7.5 i think. I put a docker with netatalk and can connect successfully to it. I do have an issue that for some reason i can't create folders but i can read and write otherwise. A guide for macintosh networking with modern...

well, i can only enter the IP for Appleshare server in OS 8.1, in 7.5.3 and 7.6 i can't find an option that let's me do it. But i run in to this, any ideas on what it could be?

I have a QNAP NAS with AFP enabled. Is there an easy way to know if that uses Netatalk or a particular AFP version? Also how do you enter the IP in the AppleTalk control Panel in the Mac?

can you use AFP over macos8.1? to connect to a modern AFP server?

well yes, that is on my list. I will do the overclocking. I also happen to have a one of those QuadDoublers, it runs but it gets very hot (this one does not have a fan, just a heatsink) and after a while the computer crashes....guessing some sort of temperature protection

that's a bummer....thanks a lot!

I have my Q605 working fine with open transport 1.3 on my 7.5.3 system. It gets an address via DHCP with ethernet. On another freshly installed image with 8.1 i can't get TCP/IP to get the DHCP server address. Not even in static address works. Any ideas of why it would not work under...

Hi all, i have replaced my Q605 CPU with the one i had in my broken 840av. So it is running at 25Mhz WITH FPU. The Q605 is not listed in the compatibility list for A/UX. Is it dead in the water or is there anything that can be done to install it with some workaround?

Hi, i have my Quadra 605 now back from storage and it is working great. I upgraded the RAM to 132MB which is an overkill but for $19.995, why not :) I have blueSCSI and can boot from multiple OS versions. Found that the best OS for this machine seems to be 7.5.3, it runs faster and very...

I could probably do that. Which will require some work to setup the address and data buses into a big LA that i could probably use at work. But what do we know about memory maps for the board architecture. I guess you could see if the CPU comes out of reset and if fetching data from...

Do you know what was the typical POST sequence of a 68k mac? Another thing i want to try is the reset circuit and the timing of the RST pins on the ICs that can be identified, all based on the BOMARC schematics, maybe it is a dead ASIC and that will be the sad end here

did some more work on VRs and oscillators, all seems to be working as expected. I am thinking on replacing the on-board VRAM. Does anyone has a mac with no onboard VRAM, does anyone knows if a failure on VRAM will result in no chime/no video ?

Here are some pictures of the board. My board does not have a removable ROM, you can see the unpopulated footprint for that connector

well, finally today i got some time to spend with the machine. I did some good isopropyl cleaning. no changes on symptoms. Here is what i tried and have found so far by following the schematics: All the on board regulators seem ok, i can measure directly on the regulators the +5 and -5V...