Oh no, i already tried it. The Key C works only on the Newer PowerPC and Intel Models. On the old 68K booting from SCSI CD-Drive is not so straightforward
I have the problem, that the drive is recognised by the System (Is correctly displayed in Apple System Profile) but doesnt mound Data CDs (ISO9600).
I found FBW Toolkit Driver, which running just fine now. It mount anything.
Thanks
can be closed
Hello guys.
I'm searching for the way to install MacOS 7.6.1 from SCSI CD-ROM Drive (I have 3: Pioneer PCP-PR1W portable, Panasonic KXL-810A Portable and Yamaha 5,25 CD-RW)
What i need is: an Universal Boot Floppy Disk, which would load CD-ROM Driver.
Do someone have such floppy disk / image...
Hello guys
Maybe someone had similiar problem and know the solution. I have a small external SCSI CD-ROM Drive Panasonic / Matshita KXL-810AN.
It can be attached on PCMCIA SCSI-II Card or straight to Macintosh SCSI-Port with an 25pol to 50pol SCSI Cable / Adapter.
I try to get it running on...
Installed MacOS 9.2.1 and 9.2.2 Update on my 2400c/180 using OS9Helper.
USB CardBus card hangs the System and prevent it from booting, when inserted :(
Hi guys,
On My PowerBook 2400c/180 i have a Problem, that all 64MB EDO RAM Module are recognized with half of capacity (32MB instead of 64MB)
Which EDO-RAM Modules i should use to get 80MB RAM ?
I know, the thread is old... But if someone still need an PowerBook 2400c Display or other parts - let me know. I"m thinking in disassemble my 2nd PowerBook 2400c to keep some parts as spare and sell some.
I can share my experience here:
I had used:
Cheap CF to 44Pin Adapter from eBay + CF Card
KingSpec PA25 32GB PATA SSD
Toshiba 128GB mSATA SSD with red DeLock mSATA to 44Pin PATA Adapter.
All 3 combinations have worked like a charm in this PowerBooks:
PowerBook 1400c
PowerBook 2400c...
Small correction: Tried it again: 2x boots were fine, 2x boots were stuck at MacOS 9.1 logo.
So there seems really some problems with cardbus cards on boot here,,,,