yeah that focus board is DEFINITELY not specific to the Pioneer LX series... I've had one for years that i picked up in a 5200...
I've got a bunch of Pioneer clones at the moment (2) GX-1, (2) LX-100, (1) LX-200...
But sadly I don't have the MO-equipped LX-200...
What model MO drive is that, and...
I'd say I've also had no issues and if you refer to the CCSCC/Takky documentation of the pinout, it appears that pin was left as NC both on harness and boards until they needed to add the +3v.
sorry i forgot to mention the CS1 slot - a great point as well.
I'm not sure changing from scsi to SD for the drive is necessary, as I've always run cc's even back in the late 90's with 550/570 boards with no issue.
A simply analog board recap should be all that's necessary.
I'm more a fan of...
personally from the prices I've seen, while the price on a 550/57x board might be high, the price isn't that far off from the accelerators designed for the CC/LCII/etc.
The added benefit at the end of the day if you're seriously looking to upgrade is that you get to keep your PDS slot, which...
While I've got both a GX1 and an LX100, I've got none of the official software load.. I do have the applications disc for a LX200 at least, but I'm wondering if anyone out there might have some details on the originally shipping configs:
What OS did each ACTUALLY ship with, and was it on a...
I've uploaded the 1.0.2 english software package to MG. I hope this helps.
https://macintoshgarden.org/apps/machandwriter
It appears that this version (the 2.0 design) is based around a rebadged wacom tablet... APPEARS.. can you provide a photo of any labels, etc from the bottom of the tablet...
Yeah, If you have this card, you'll definitely want to get that firmware updater and driver, etc.
I recall life with this card being a lot better with it than not.
Also remember that if you put more than 32MB ram in your 5300, Focus made a wierd note that there's a bug on the 5300 board that...
cheesestraws - I already seem to have bunch more drivers not archived by the usual suspects after digging for this specific one over the last few weeks, so I might see about fixing the mess that's out there.