Recent content by Danamania

Converted. http://www.danamania.com/tmp/mpp.pdf I think the helvetica might still be a bit weird, but the rest looks good. I like that there's a weird font spacing issue in the image, too :)

After that, Preview on Catalina converted the .eps to a visible document I could then save as a .pdf, too.

I went through some of the same issues a few months back converting some of those documents. Those font issues were solved with a print to .eps - embedding worked well there. Nowadays everything is .pdf, but I guess back then support was a bit flakey, and .eps was stronger. perhaps. Edit: may...

What cheesey said. In general items like these can be absolute goldmines btw, though from a quick look around the time may be up for this one. If a print house has working equipment, many will be hesitant to get rid of a setup that's done them well for decades. A card like that to the right...

Oh goodness. I remember that post. Was that really 20 years ago?

Aye, I want to add a tiny gigabyte or two pool on the NAS, absolutely isolated so it just appears as a small share to swap files on 7.1 machines conveniently. At the moment I've been working around that by sharing my permanently set up and turned on Q605's 4GB drive, and ultimately that's the...

The file size issue on earlier system versions is a volume issue. Back when I had a smaller volume on my NAS it was less of a problem. Once I added another drive and brought the pool to 12TB, it really started getting ridiculous. Still works, though, for everything down to 7.1 - except 7.1...

I had the same happen on the same model display a few years ago. I'd had the display sitting on wooden fibreboard shelves for years, pulled it down and all feet were fine. Sat it on top of my 6360, and within hours the rubber had melted and ran down the front of the Mac. *only* on one corner...

Worth mentioning just in case is you need to have the AppleTalk control panel set to the port the AirTalk is connected to, or the AirTalk chooser extension won't see it.

A twitter thread of AirTalks, with lotsa pics.

A IIsi resto is my current project, and it's up and running happily - I recapped its PSU last weekend, which went a lot quicker than expected (I haven't done many recaps, and it was a horrid mess beforehand). It was all through-hole except for the daughterboard SMD caps, which were just a little...

This should help with the how to open, pointing to the latch Cory is referring to, also the 'foot' which is just a thin black plastic piece that slips into a supporting position when opened fully, but needs to be manually released or it'll just snap when you try to fold the drive bay parts down!

Going back a long long way, but there were posts in the early 2000s of 060 to 040 adaptors working in only one model. One of the last 68ks, the LC/Quadra/Performa 630 series which was supposed to fire up OK with an 060, at least to the point of booting.

fwiw, OT1.3 brings similar improvements to at least as far back as 7.1, too.

It's not the same card, but it gives me REALLY strong avid vibes, like this one that came with my Q950. https://www.applefritter.com/node/2157 Edit: actually the main part of the card DOES look the same, but with a different end on it. All the visible components in the same spot.