I haven't made any actual model changes yet, but I've uploaded the profile I used to print here: https://makerworld.com/en/models/167248
I plan on making model changes when I get a chance to fix my 1400s
Thanks for the excellent write up. I imagine the shim/fix should hold up quite well. That said, thanks to your fantastic pictures/walk-through I can spot a few points that could be improved on the shim (eg. the edge you melted for cable routing) and still have it be as strong. When I get a...
So I've got 3 PB1400s (technically 5, two are in pieces, so IDK if their totally complete). Would preemptively printing this and installing this be a good idea? None of mine are showing cracks at the hinge yet, but I know know how brittle the plastic is due to time.
@AEChadwick - If I do print...
So I've been looking into CF and SD to IDE adapters to fix up a PB1400c and a PB3400c that both had failed disks but otherwise where working great.
I've used both this CF->IDE: https://www.amazon.com/gp/product/B07899TZF9/ and this SD->IDE: https://www.amazon.com/gp/product/B07QNB6QLC/...
I don't think its a common part you can just pickup anywhere.
I have both a PB G4 and a Pismo as well.
The Pismo adapter looks like it uses a mono 3.5mm headphone connector as the center pin, with a 9.5mm outer RCA connector style ring.
The G4 adapter looks like its the same but uses a 2.5mm...