-
Hello, Guest! Welcome back, and be sure to check out this post for more info about the recent service interruption and migration.
aplmak's latest activity
-
aplmak replied to the thread Oki LED B4600 Printer *Need Help*.Well here is the file... perhaps someone can convert it into the installer it's supposed to be??? I had to move it to a PC then Zip it... -
Trying to install drivers for a solo B4600 on my MacOS 9 machine. It has the drivers but I cannot get this PCL installer to launch.. is...
-
-
aplmak replied to the thread PowerMac 9600 Logic Boards.That’s an excellent idea. All my bays are taken up. There is a huge amount of space at the bottom of the case though. I installed the G3...
-
aplmak replied to the thread PowerMac 9600 Logic Boards.Yes I have both of those. I have some spares as well if each. I’ve actually recapped them with tantalum capacitors before they...
-
aplmak replied to the thread PowerMac 9600 Logic Boards.Phipli thanks for the info!! I actually don’t have a 9600 but was curious. I was considering one. This information I’m sure will be very...
-
-
Could someone explain the difference between the two logic boards? One appears to have more soldered on chips near the PCI slots and one...
-
aplmak replied to the thread SE/30 Logic Board Mod.Thank you so much!!!
-
aplmak replied to the thread SE/30 Logic Board Mod.I believe it’s 0.1uf 5v or higher? Could someone confirm I’d appreciate it 😊
-
aplmak replied to the thread SE/30 Logic Board Mod.Hey I found a broken cap.. any chance someone could tell me the value of the cap at C39 on the rear of the SE/30 board??? Ceramic cap...
-
Hey anyone know what this mod was done for??? It’s the only one except the other usual one.. Matt
-
-
aplmak replied to the thread Copying files to USB Freezing.Well I figured it out after hours and hours so hopefully this thread will help someone!! I had to remove all the OS 8.6, OS 9.1, or 9.2...
-
aplmak replied to the thread Copying files to USB Freezing.Maybe I’ll try OS 8.1, 5, and 6? All versions of 9 don’t work.
-
aplmak replied to the thread Copying files to USB Freezing.Not an OS error and not even a hardware error.. I’ve even used an entirely different logic board! And four different and same pci usb...
-
aplmak replied to the thread Copying files to USB Freezing.Hey gang there has to be some reason this is freezing. I’ve tried all different scenarios from just now a fresh small install with USB...
