There’s are standoffs, I got it booted up finally, I had to adjust the voltage on the analog board to come up to 5v, it was low when the upgrade board was installed, once adjusted to close to 5v it finally powered on. It’s still finicky, I think the analog board needs some love. Not sure how to...
Ok, removed the levco 2mb board and the machine powered up right away! Floppy works perfect and boots into finder 1.1. So, does anyone have experience with these boards? It clamps right over the 68000, I thought those had to be removed? Anyways, if anyone has a levco 2mb board jnstallled jn a...
Pretty sure this sound isn’t good. It’s a 128k with a monster Mac 2mb upgrade board with scsi.
it powers on to a checkerboard pattern and this sound. I’m not powering it on anymore, just to get a quick video.
Any and all help would be greatly appreciated - if anyone has a monster Mac...
Well crap, as I was separating the 2 boards, this black wire that clamped to one of the IC’s came off before I had to chance to note where it went. Argh!!! Anyone with one of these boards have any idea? It connects to the upper levco board at PC Overlay.
help!
Just picked up a 128k with a monster Mac conversion, complete with carrying bag, keyboard mouse and system disks.
Checkerboard screen so will clean and recap. Any idea what the black thing is that’s only connected to power on the power board but nowhere else? It’s Velcro’d in ...
You sure that pad is gone? You've cleaned it up with flux and new solder and desoldering braid with a chisel tip? Maybe probe C102 to see where it goes and that will maybe help get you in the general area. Good luck! I wish I had a working PB100 - recapped my board which was a total PITA...
Ok scraped back the track and used some copper tape to repair this. Waiting on an order or some transistors so I can finish this board and see what happens...
It’s been quite a time in quarantine....fixed up a IIfx, Color Classic, SE/30, etc...
recapped my backlit model but can not get the floppy drive to work, it crashes the system. I have a second backlit motherboard I’m ready to recap but notice that Q4 has a missing pad....looking at the...
OK - it seems like I lifted the pad at pin 20 - argh - the wire that goes to 24 - it looks like the pad runs to J79 which is not jumper anyways - so is that ok? Also, does J79 need to be jumpered?
t
Well, I have a sinking feeling I did something wrong, but I'm not sure what -
Did the VGA mod (1st option, cutting the analog board) and I got it all back together but when I try to power it on I get a few high pitch clicks and it doesn't turn on. Here are some pictures of what I did -
I...
Update, installed a SCSI2sd I had from an SE/30 and it powers up! Boots great from SCSI, but neither the floppy or floppy emu work. When I use floppy emu I get a disk error, do you want to initialize this disk etc and then it will fail. If I keep the internal floppy hooked up the system crashes...