Recent content by 24Pintech

Hello, I got busy yesterday but it worked right away thank you very much.

Okay thank you for this information I will let you know what I can do and if it helps and works out.

Unfortunately not, I was able to boot into OS 7.5.3 with the SCSI2SD but after It starts to "repair" it brings up "Disk initialization failed because the disk is locked" I will provide pictures in a little bit. I forgot to add that this is a project in my computer classroom for our Macintosh...

Hello, I was having many problems trying to get my SCSI2SD working on my original Macintosh Color Classic but I decided to follow this forum (https://www.savagetaylor.com/2018/0...lassic-68k-macintosh-using-a-scsi2sd-adapter/) exactly and I got booted into the OS but I got an error code saying...

Hello, I was having many problems trying to get my SCSI2SD working on my original Macintosh Color Classic but I decided to follow this forum (https://www.savagetaylor.com/2018/01/05/setting-up-your-vintage-classic-68k-macintosh-using-a-scsi2sd-adapter/) exactly and I got booted into the OS but I...

Okay thank you! I will try once again once I get into class again, I will keep you updated on what happens.

Were the steps not for the color classic? or do I not need the molex to 4 pin connector for the color classic?

Thank you. I will try this once I figure out if the Listing above works or not. Thank you for the blog as well, It has helped a lot.

Thank you for the advice, unfortunately it didn't work but I think I know the problem. But I have a question about it first off. Is it necessary to have the Molex to 4 pin connector to get the SCSI2SD to use the SCSI2SD to get the SD card to be read.

Okay thank you for the information. I will link what websites I have used and what I am having trouble with. I followed the Dave and Steve's Blog http://www.savagetaylor.com/2018/01/05/setting-up-your-vintage-classic-68k-macintosh-using-a-scsi2sd-adapter/ The firmware step was confusing for me...

My teacher and former students/employees were trying to run basilisk through an sd card through the SCSI2SD, I was just seeing if anyone has done it before or knows how to do it. I've spent some of last year and this year researching with no luck.

We are not able to use floppy, It doesn't work on our Color Classic, we are starting to look for one online we can buy since we have the floppy with the os it's just the Floppy doesn't work on the Color Classic.

Well when i turn it on it shows that I don't habe any mountable on my computer hints which is why I'm using the SCSI2SD. I have updated the firmware on the SCIS2SD to the latest 5.2 from https://www.scsi2sd.com/v5/releases/ I am still having a little trouble finding a proper install media of MAC...

I will link the websites I've used thus far. Thank you for the link as well I will be sure to try following it again. http://www.savagetaylor.com/2018/01/05/setting-up-your-vintage-classic-68k-macintosh-using-a-scsi2sd-adapter/...