Jump to content

Power Mac 8200/120, no video output


Recommended Posts

I recently acquired a Power Mac 8200/120.

 

It turns on and chimes but doesn't output any video.

 

I tested it's RAM and VRAM in another machine and it's fine. I even bought a PCI Formac video card, but still no output (the card also works in my other PCI Macs).

 

Is there anything else to try before I call it quits?

Link to post
Share on other sites

Is there a functional PRAM battery installed? I'm not sure if this model needs one, but it is a 601 and I do know the earlier 601 PowerMacs absolutely need one to output video on a cold boot. Another way to try is to reset the machine after the first chime, or turn it off and on quickly after the chime. If you do get video that way, that would confirm a PRAM battery is necessary.

Link to post
Share on other sites

The 8200 is relatively 'rare' - a model only sold in Europe. For me, that is reason enough to not scrap it.

 

This could well be a PSU or logic board issue I think, the PSUs in these are unreliable at best (the one in mine blew up). An ATX conversion is easy enough to do.

 

If you can't get it working, I'm sure someone in London will be happy to take it off your hands (unfortunately not me, a single encounter with a 8200 was enough for me).

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...