Kai Robinson Posted August 15, 2020 Author Report Share Posted August 15, 2020 @cheesestraws @PowerMac_G4 - I HAVE DISCOVERED A TRACE ISSUE! Look here - you'll see i've connected stuff that has no business being connected. I accidentally pistook a trace going into a pad - turns out that i'd actually shoved the trace out the way while desoldering. I just verified against other SE boards - see the original, and the fix. Can cut the trace and patch direct with a bodge wire Quote Link to post Share on other sites
Kai Robinson Posted August 15, 2020 Author Report Share Posted August 15, 2020 Here's the patch around in the latest board rev. Quote Link to post Share on other sites
Kai Robinson Posted August 15, 2020 Author Report Share Posted August 15, 2020 (edited) ....aaand there's a short circuit between the power planes in all the board revisions. CANCEL YOUR BUILDS, DESOLDER. I'll send out another batch of boards FFS - its only on the split power plane at the back - can't locate it...c8 links to gnd and power, and even without a capacitor in, the planes are linked. Edited August 15, 2020 by Kai Robinson Quote Link to post Share on other sites
Kai Robinson Posted August 15, 2020 Author Report Share Posted August 15, 2020 However, some troubleshooting later (ie, desoldering all power from the rear I/O by removing the inductors...) IT'S (kinda) ALIIIIIVE!!!! Quote Link to post Share on other sites
quorten Posted August 15, 2020 Report Share Posted August 15, 2020 (edited) Nice! What did your plan for the PSU issues turn out to be? Did you end up fixing your existing PSU, get a replacement one, or some other magic didn't require changes there? Also, did you hear a reasonably sane startup chime? Edited August 15, 2020 by quorten replacement Quote Link to post Share on other sites
quorten Posted August 15, 2020 Report Share Posted August 15, 2020 (edited) Judging by the troubleshooting info around here at 68kMLA, that's definitely a logic board issue! Tongue-in-cheek, check the address multiplexers, check the ROM, try with different RAM or different amounts of RAM, etc. Edited August 15, 2020 by quorten Troubleshooting joke Quote Link to post Share on other sites
Kai Robinson Posted August 15, 2020 Author Report Share Posted August 15, 2020 Turns out that the PSU was fine - it was indeed a short circuit thanks to that split I/O power issue. No startup chime either. Quote Link to post Share on other sites
quorten Posted August 15, 2020 Report Share Posted August 15, 2020 Cool, really glad to know that TechKnight was right. I was also thinking similar based off of anecdotal evidence about what happened after I jammed a floppy disk into a Macintosh SE upside down and backwards over 20 years ago, but I thought it would sound too silly to try to mention that and say something similar could prevent the PSU from starting up. Quote Link to post Share on other sites
Kai Robinson Posted August 15, 2020 Author Report Share Posted August 15, 2020 ....And the 68k has no power. OH CHRIST THAT'S LITERALLY THE FIRST THING I SHOULD HAVE CHECKED!!! OK, MORE BODGE WIRES Quote Link to post Share on other sites
Kai Robinson Posted August 15, 2020 Author Report Share Posted August 15, 2020 Second batch of prototypes have now been put up for order - hopefully they split the rear i/o power plane properly. Quote Link to post Share on other sites
PowerMac_G4 Posted August 15, 2020 Report Share Posted August 15, 2020 10 hours ago, Kai Robinson said: Second batch of prototypes have now been put up for order - hopefully they split the rear i/o power plane properly. I literally just logged in to let you know I'd found a few faults in your design and here you are two steps ahead of me! I've not even got a donor SE on my bench yet so no rush... p.s. I'd love to see some red PCBs some day. I love red PCBs and Apple prototypes all have red boards IIRC. Quote Link to post Share on other sites
Kai Robinson Posted August 16, 2020 Author Report Share Posted August 16, 2020 Did you find any other faults, or just the ones i've noticed already? Quote Link to post Share on other sites
cheesestraws Posted August 16, 2020 Report Share Posted August 16, 2020 On 8/15/2020 at 2:36 PM, quorten said: jammed a floppy disk into a Macintosh SE upside down and backwards over 20 years ago I feel less alone for having read this sentence. On 8/15/2020 at 10:22 AM, Kai Robinson said: CANCEL YOUR BUILDS, DESOLDER. I'll send out another batch of boards I'm still waiting for my 68pf capacitors to arrive, for some reason I do not understand, soooooo Quote Link to post Share on other sites
Kai Robinson Posted August 16, 2020 Author Report Share Posted August 16, 2020 Yeah sorry about that lads - i'll send out the replacement boards - in the meantime - feel free to turn your existing one into a piece of wall art Quote Link to post Share on other sites
Kai Robinson Posted August 16, 2020 Author Report Share Posted August 16, 2020 BTW am i allowed to post my paypal address here for donations? I feel cheeky even mentioning it Quote Link to post Share on other sites
rplacd Posted August 16, 2020 Report Share Posted August 16, 2020 I don't know, but we'd love to find a way to support ya! Quote Link to post Share on other sites
quorten Posted August 16, 2020 Report Share Posted August 16, 2020 Considering the point that all moderator decisions are final, I'd probably defer to an admin/moderator to fully answer the question (as it seems you're also assuming), but looks like there were no admins/moderators who were eager to add themselves as followers directly to this thread. You could @-mention or PM Cory5412 and see what he thinks. But, from my read of the rules, it doesn't seem like there's any restriction against this, just "don't be a spambot to generate ads revenue." Quote Link to post Share on other sites
Trash80toHP_Mini Posted August 16, 2020 Report Share Posted August 16, 2020 I'd keep that kinda stuff to PM. Quote Link to post Share on other sites
Kai Robinson Posted August 17, 2020 Author Report Share Posted August 17, 2020 In which case, i'll leave any donations to PM's then - about to pull the trigger on the second batch of boards. Quote Link to post Share on other sites
Kai Robinson Posted August 17, 2020 Author Report Share Posted August 17, 2020 10 days til next batch Quote Link to post Share on other sites
techknight Posted August 17, 2020 Report Share Posted August 17, 2020 Oh the joys of PCB design. I dont know exactly what CAD package your using, but I always run DRC and ERC checks before I render out gerber files. it will tell you right away (as long as you have a valid annotated schematic and or netlist) if there are trace issues, or overlaps, shorts, etc. Quote Link to post Share on other sites
Kai Robinson Posted August 17, 2020 Author Report Share Posted August 17, 2020 Sprint has a basic DRC function - it came in handy for moving a few traces out of the way - some were drawn a little too close, although JLCPCB's tolerances are pretty good for even small stuff. Nothing is now unconnected - i thought rather than mess with more bodge wires, the first prototype has done it's job and shown me that there is light at the end of the tunnel - hell, when doing the A500++ boards, theres a reason the production boards are v2.1 Quote Link to post Share on other sites
techknight Posted August 17, 2020 Report Share Posted August 17, 2020 yea the power planes could be shorted together at multiple Vias. only way to know is run a ton of current across the two planes and figure out which vias get hot. Drill them out. but thats the "not so fun but fun" solution. haha. Biggest mistake I ever made was designing one of my boards and I accidently crossed the 5V and 3.3V VCC planes in the middle layer of the board. and didnt catch it. Whoops. by the time I realized my mistake and why CPUs had such a short life time, it was too late obviously. So I got myself familiar with the Dremel and dug into the inner plane of the PCB and broke the short. Quote Link to post Share on other sites
Kai Robinson Posted August 17, 2020 Author Report Share Posted August 17, 2020 Ideally for that to work, i'd need a FLIR camera - fingers crossed i won't need it this time. Using the pin test function in Sprint i've verified that everything that should be on ground, goes to it, everything that goes to vcc goes to it without a short to ground. Quote Link to post Share on other sites
techknight Posted August 17, 2020 Report Share Posted August 17, 2020 (edited) Im not familiar with Sprint other than the cellphone service. Ive always used EAGLE. Edited August 17, 2020 by techknight Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.