Search the Community
Showing results for tags '540'.
Hopefully, this would come in handy for anyone curious about the PCMCIA module made for the PowerBook 500 series. I've posted as many pictures from various angles of the board assembly and parts (in case anyone has interest in planning modifications and how much space is inside the module) as I don't intend to open this up very often. If at all. There are three hex screws, one plastic tab, and a sticker holding my Rev C module together. I didn't have a hex bit of the correct size, but a Torx T6 proved a snug fit that allowed me to remove the screws. When I depressed the plastic ta
Hello! At some point around high school (somewhere around '99 or '00), my parents got my nephew and I "new" Powerbook 540c's which at the time gave us intermittent problems, but which I got some use out of nevertheless. After years of neglect, I turned mine on briefly back in 2011 to see what was on it and to retrieve a few things, but otherwise it has basically been sitting around unused for quite awhile. I decided recently to try pulling it out once again but was disappointed to find that, other than a meek squeal, followed by the boot chime, it wasn't loading the system, not even a bl
Sorry if this is in the wrong section but I recently pulled out my PB 540 and decided to try fixing some problems. These are the problems its having: -Screen is cut off on lower part unless putting pressure on it. -LCD Cable has been cut a little -Audio doesn't work -Not sure if this is an issue but the screen begins to fade from all edges to black after a while. I uploaded a picture of the LCD needing pressure to actually work, and the hinge cable being cut. I figured since this is the only cable going to the LCD that maybe the connections to the audio had been cut on the ribbon c