Jump to content


  • Content Count

  • Joined

  • Last visited

Profile Information

  • Location
    Paris, France

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. you should clock it to 500Mhz
  2. Hello, In any PM 9600 config, SCSI card (or SCSi-like) should be in A1 (faster card in top slot, and then) ; according to me your config should look like this : A1 : ACARD 6880 B1 : Empty [suitable for Firewire] [or USB if nothing in C1] C1 : Empty [suitable for USB if Firewire in B1] D2 : Ethernet (in certain circumstances [OS X, intensive networking], Ethernet cards work best when they have priority over Video card here in E2 [when they are in top slot of bottom controller]) [Asante cards should always be there in D2 (OS9, OSX) E2 : IX Micro Video card or any ATI video card F2 : Empty [suitable for nothing : leaves room for optionnal HDD] and yes, the 9600 Graphics accelerator is the card's driver Edit : And unless you need DVI, a Rage 128 is fine
  3. 604ev

    How to tell if SE/30 has been recapped?

    This SE/30 , for sure, has been recapped Pictures of the Motherboard in SE/30HD:Documents
  4. The Digigear SDHC PCMCIA card is 16bit https://www.ebay.com/itm/SD-SDHC-SDXC-to-ATA-Flash-Memory-PCMCIA-PC-Card-Adapter-Reader-for-256GB-128GB/371129508743 ..and very slow in the PowerBook G4's 32bit cardbus slot..
  5. 604ev

    PowerMac 9600 startup problem

    Welcome to the Machine
  6. 604ev

    Yet another free PPC for me.

    Welcome to the canteen
  7. 604ev

    RAM Dilemma

    256Mb (4x64Mb interleaved) are enough and fine for a bare 10.2.8 Unless the 16Mbs are good 60ns EDO with gold connector, I'd give up with them
  8. 604ev

    RAM Dilemma

    Unless it has a big L2, a 7200rpm HD and an ATI Video card (any), I don't see what you could do with it... Are the 16Mbs 60ns or 70ns?
  9. If I were in USA I'd get an OWC memory. Currently, in France, those PC100s are difficult to find while one can still get CL3 PC133s. If only I had one, of any capacity, I would try myself...
  10. Not sure that the onboard CL2 PC66 will work with any CL3.. It would be interesting to know if someone has one working in an 366/466 iBook. OWC doesn't show it as compatible : http://eshop.macsales.com/shop/memory/iBooks-PowerBooks/G3-iBook/
  11. Well.. Is it possible to upgrade this 466Mhz FireWire ibook G3 with CL3 SO-DIMM (PC133), or does it only work with CL2 (PC66/100), as specified by Apple ?
  12. i'm sure there is another folder which hosts local shared folders aliases (it isn't the "servers" folder)
  13. restarting extensions Off then re-delete all appletalk prefs & users&groups prefs and then pram is the best one can do otherwise, as a LocalTalk server, nothing's better than Jaguar 10.2.8 ...
  14. If I recall... the file "AppleSharePrep" stands for the Servers to be mounted at Startup, so it is no related to slow AppleShare's startup but can be deleted. And an AppleShare related folder (can't remember the name) inside SystemFolder contains the Aliases to Shared folders on your Mac. If this folder is full it does slow down a lot AppleShare Startup.
  15. remove "AppleShare prep" in prefs and also some AppleShare folder in system folder