Jump to content

Forums

  1. Important Information

    1. The 68kMLA Forum Rules   (10389 visits to this link)

      To quote vintage Apple manuals: "Read Me First!"

  2. Community Connections

    1. General 68kMLA News & Stuff

      What's going down in the barracks.

      3980
      posts
    2. Conquests

      Discuss your latest vintage Mac finds!

      40018
      posts
    3. Trading Post

      Feel free to trade all of your Mac goodies here with all honest intentions. The website provider assumes NO liability, so buyer beware! Please see this topic for more information.

      54359
      posts
  3. Projects & Hosted Forums

    1. RetroChallenge

      What can you do given only one month and strictly "retro" hardware? Find out with RetroChallenge!
      http://retrochallenge.org/

      1490
      posts
    2. 68kMLA Wiki

      The creation and maintenance of the 68kMLA's information repository.
      http://68kmla.org/wiki/

      549
      posts
  4. 68k Model Forums

    1. Compact Mac

      Macintosh, 512k, SE, etc.

      47286
      posts
    2. Mac II, Quadra & Centris

      Just think, having a Quadra 950 in 1992 would be like having a Mac Pro today… except with more slots, more expandability, and on-board SCSI!

      13575
      posts
    3. 68k LC & Performa

      Ah, the consumer computers!

      8245
      posts
    4. 68k PowerBook

      From the Portable to the 190cs.

      10252
      posts
  5. PowerPC Model Forums

    1. NuBus Power Mac, LC & Performa

      The NuBus architecture gets a new brain!

      2715
      posts
    2. PCI Power Mac & Performa

      The PPC comes of age and adopts the industry standard expansion slot.

      6003
      posts
    3. G3/G4/G5 Power Mac, iMac & eMac

      From the Beige G3 to the quad-core G5, via various iMacs!

      13821
      posts
    4. PPC PowerBook & iBook

      All that power in a laptop? Never…

      9107
      posts
  6. Everything Else…

    1. Apple I, ][, /// & Lisa

      Not really 68k Macs, but certainly Vintage!

      7494
      posts
    2. Newton

      The best PDA ever finally gets its own forum!

      1074
      posts
    3. Software

      Includes system stuff, productivity, emulation, design, and games for pre-OS X Macs!

      17644
      posts
    4. Hacks & Development

      Yes, it's back! Hardware hacks/modifications and software development for Mac OS.

      19622
      posts
    5. Peripherals

      Anything you can hook up to your Mac or stuff into it as an interface!

      14887
      posts
  • Posts

    • +1   After you remove the SMD electrolytics and give it a good scrub, do a close check of traces / continuities around those pads. I just reparied a IIci board that had a half-dozen broken traces, a couple with no obvious sign of corrosion and further away from the caps than I expected -- and your board has more goo than this one did. Pernicious stuff.   Good luck! These Mac II's are awesome machines.
    • Just checked the old big thread, and the SE and the Q700 are the only models in there that I could tell (at least I didn't see a thumbnail for the II switch).
    • Check the other thread first. Dunno if it's been done already, but do a wheel check before starting.
    • There’s goo everywhere.    So, as usual, new caps and a good wash.     
    • It's been a while since I even worked on this so bear with me while I get my thoughts together.   Regarding the desoldering: the board I was working on had a heavy amount of oxidation (not corrosion) on all the pins and solder to the board. It took quite a lot of time, flux, and combination of regular iron and sucker desoldering iron to even free all the the pins up. Resoldering took no time at all due to not having to deal with that. There are 3 or 4 boards which needed repair probably 25 years ago that were part of some guy's repair shop and just never thrown out. Trust me, no though here of questioning my soldering skills. If I can learn a newer/better way of doing it, I am still a beginner with all this so I always appreciate help and tips.   The reason I was originally suspicious about the chips is that when I started up using that board originally, I got a chime, gray screen, and then the RAM test error with a sad Mac. After replacing the chip the first time, with no modification, I got no chime and no screen activity whatsoever...so it got me thinking that I must have messed something up with the RAM or the RAM itself was bad because going from RAM test showing a bad chip to NOTHING was concerning to me.   Another distinct possibility is that I somehow reversed the chip entirely. These chips have no notch or dot denoting the top or pin 1, so I went with a guess based on the orientation of the printed writing on it. If you know for certain what side has pin 1, please correct me.   I have one 512ke in my possession that works and has never been modified to my knowledge, so I can certainly use it as a test board to verify the +5v /0v to verify the pins in a working machine.   I still have probably 15 or so chips to use. I bought them to replace bad chips on all three boards. In this instance, I will use them to make sure that we all can figure out this mystery for certain (though I hope that does not take 15 good chips destroyed!).   My last thought was this: to make this a lot easier, I am just going to solder in mini sockets into the RAM chip spot. This way, we can test whatever we need and see what to do next without me taking forever to do it.
×