BlueSCSI does not boot Mac SE

[BobDaAggie]

So I have finally purchased and installed an internal BlueSCSI for my Mac SE. The BlueSCSI does not boot the Mac. I can boot it off of my external BlueSCSI and when I do the drives that are set up in the internal BlueSCSI do show up.

I swapped the SD cards around but nothing I did could get the Mac SE to boot off the BlueSCSI. I enabled debugging mode and have attached the log.

Any help would be greatly apreciated.

 

[shirsch]

Your log shows:

[4961ms] DBG Waiting for USB enumeration to enter Card Reader mode.
[6061ms] DBG Waiting for USB enumeration timed out after 1000ms.
[6061ms] DBG -- Try increasing 'USBMassStorageWaitPeriod' in the bluescsi.ini

Did you try what it suggested?

 

[mikes-macs]

1000ms is not enough.

 

[BobDaAggie]

Okay, I thought that I had done that with the dwell time but I will check in my system file

 

[bakkus]

Have you tried booting without an INI file? It's not really needed for normal operations for common machines like the SE.

 

[BobDaAggie]

So I increased the time to 10000 and then to 999999 but it did not work. I then deleted the ini file and it still did not work. This is my latest log file

Platform: BlueSCSI (Pico2/W)
FW Version: 2026.03.01-rel Mar 1 2026 15:12:15
Flash chip size: 4096 kB
SPDIF Mode Enabled - I2C Disabled
Reclock Pico 2/2W based boards to standardized speed
Reclocking with these settings are compatible with CD audio playback
Initial Clock set to 150MHz
Reclocking the MCU to 203MHz
Setting the SDIO clock to 41MHz
After reclocking, system reports clock set to 203MHz

=== SD Card Info ===
SD card detected, exFAT volume size: 1885 MB
SD Name: SU02G, MID: 0x03, OID: 0x53 0x44
-- WARNING: Your SD Card Speed Class is 0. Class 10 or better is recommended for best performance.
BlueSCSI CD Audio Enabled - Connect DAC to BlueSCSI or use SPDIF on I2C SCL pin

=== Global Config ===
bluescsi.ini not found, using defaults

=== Finding images ===
=== Finding images in / ===
== Opening /HD00_512 Boot-6.0.8.hda for ID:0 LUN:0
---- Configuring as disk drive

== Platform supports ROM drive up to 2848 kB

=== Configured SCSI Devices ===
ID: 0, BlockSize: 512, Type: Fixed, Quirks: Apple, Size: 40960kB

 

[mikes-macs]

-- WARNING: Your SD Card Speed Class is 0. Class 10 or better is recommended for best performance.
-- bluescsi.ini not found, using defaults

 

[frontein1]

The SD Card Formatter is probably worth trying. Like it says on the bluescsi.com site, use the overwrite format option to really go low level.

SD Memory Card Formatter for Windows/Mac - SD Association

Watch our video on how to use the SD Memory Card Formatter SD Memory Card Formatter 5.0.3 for SD/SDHC/SDXC/SDUC The SD Memory Card Formatter formats SD Memory Card, SDHC Memory Card, SDXC Memory Card and SDUC Memory Card (respectively SD/SDHC/SDXC/SDUC Cards) complying with the SD File System...

www.sdcard.org

 

[BobDaAggie]

The SD Card Formatter is probably worth trying. Like it says on the bluescsi.com site, use the overwrite format option to really go low level.

SD Memory Card Formatter for Windows/Mac - SD Association

Watch our video on how to use the SD Memory Card Formatter SD Memory Card Formatter 5.0.3 for SD/SDHC/SDXC/SDUC The SD Memory Card Formatter formats SD Memory Card, SDHC Memory Card, SDXC Memory Card and SDUC Memory Card (respectively SD/SDHC/SDXC/SDUC Cards) complying with the SD File System...

www.sdcard.org

I saw that but because the external BlueSCSI works with the SC card I dismissed it.

I will try that and see what happends