Search results

pretty pretty nice:)

already did, several times, and I found some disconnected lines though! -- I repaired them to the point that I was able to get a good chime but no video unfortunately :(

@MJ313 they where quite corroded, to the point that I completely removed them, since the Q700 has onboard ram I am trying to boot with that instead of any ram slots

hey @michaelweare Unfortunately I have not, I thought it was a bad ram; changed all the ICs; nothing. Checked with a scope the clocks and everything seemed to be well. I am at a road end, I dont know what else to look for so any suggestion on where to look at or what other diagnostics you...

where is hot you should use 105C where is not as hot then 85C -- for example, on the portrait display pretty much all the caps are rated to 105C, that's because it gets quite hot (the display even comes with an internal fan). The idea is that the 105C rated caps will last longer than the 85C...

hard to recall :( but could be? -- it was one of the larger ones

The micro ball was between two pins behind a SMD IC. It’s not about the traces, the balls where stuck between two legs on the ICs

I would check for microscopic traces of solder balls touching pins, that was my case. good luck !

hey everyone, (happy new year!) alright I'm back -- I went ahead and checked all the on board ram lines on _all_ the connections on all the pages (3, 4, 6, 8, 10 ,20) are correct. I did noticed that on the PDS socket there was one missing connection -- I fixed it but still I get the same...

ha!, alright alright -- I was checking and rechecking and rechecking the video clock generator circuit! -- I almost memorized it, exchanged resistors allover the place and everything checks out! @dougg3 interesting, thanks for chipping in, I will be checking all the on board ram data lines on...

Alright, I went ahead and checked on PIXCLK -- According to the DAFBII the PIXCLK input should be 57mhz -- yet I only get 35Mhz as shown in the diagram -- I am not too familiar with measuring clocks but could it be that U30 is bad? I went ahead and checked the resistors for the crystal (Y3) and...

interesting, thanks for the insight! -- do you happen to know where would this video initialization happen / any suggestions where should I look into for the video initialization? BTW -- I dont have any battery attached to the machine (but I dont think this matters in the quadra 700)

Hey Everyone 👋, I am working on a Quadra 700 that was battery bombed -- I managed to fix it so it chimes (good chime) but still I cannot get any video out from it. I already checked several similar posts (https://68kmla.org/bb/index.php?threads/quadra-700with-no-video-output.46895/) and went...

Thanks for posting this!, indeed the resistance between 5v and gme is ~13ohm I thought I had a short as well, turns out there is none. I also have a bombed Q700 and managed to get it to a point where it chimes correctly but I don’t get any video unfortunately:/

this is impressive! I have been wondering if this was possible on a Quadra 700 -- thanks for sharing this @killvore ! :O

Hey there, I know this post has been now 4 years old but I was wondering. Where you able to figure out the issue? I am facing the same exact situation. Death chime and no video. Tried external video cards and insta death chime

Kudos to how perfectly well you are getting those traces back! 🙇‍♂️

Interesting -- Does anyone know if by using a CR32 battery instead of the AA battery, will this be enough to boot the LC475?; or are these logic boards required to just use AA batteries

Hey guys! I SOLVED IT! 🎉 Again thanks for all the feedback -- I ended up checking Adrian's video and as I was planning to check the signals -- oddly enough if SIZ0/SIZ1 signals would mismatch with the actual ram I believe the computer wouldn't work YET, that was the lead I was needing!. Turns...

ha! -- I havent checked the latest video of Adrian, I will follow up on that one next! thanks @dv- . Also great to know that I could boot with UB11 because most of the time "it just boots" and sometimes it doesnt and I could boot it by manually triggering ping 5 to ground on UB11 as...