Search results

While I did save the original amber LED, I replaced mine with a blue one which is connected to my BlueSCSI I don't know if mine was dim, or if it was just my old diabetic eyes, having problems seeing it. But it did seem kind of dim to me, and the blue one is much more noticeable. The only real...

Thanks for the schematic and the advice. I was hoping something like this would show up. It looks pretty simple to splice the +12V wire at pin 10 on the power connector. I would probably just cut into the lead coming in on the power supply side, I certainly don't want to be cutting traces on...

Yes, I am running the After Dark screensaver, but I was just curious if there was a way to turn The screen completely off. Chuck E.

If I wanted to leave my SE/30 on 24/7 for use as a server or BBS, is there a way to add a switch into the monitor circuitry to turn the monitor off so that the CRT doesn't get screen burn? thanks Chuck E.

Thanks for the pointer to that article.

I have the BlueSCSI Desktop version in my SE/30, currently I have created 2gb images with DiskJockey what I'm wanting to do is create MUCH a bigger image and Partition it in to smaller ones can I partition the BlueSCSI images like I would a regular drive? and if so what are my limits on...

Ok, I was able to get DCHP to work by using the User Mode To make it active all the time and Saving the setup and re-booting. Since I have the router set for a Static IP for the Asante´ cards Mac Address, the settings look like my Manual settings. But now I have a saved set up for both manual...

I didn't realize what the issue was myself until I found a PDF of the installation and set up manual for open transport, online, and I noticed where they put the DNS addresses wasn't where I had mine. What I don't understand is why the DCHP setting doesn't do anything at all, when I chose it...

Well, it looks like I found the problem. I had the DNS servers in the wrong box. I moved them over to the box on the left and Now everything is working just fine. Frog find came right up. I probably need a better browser than Netscape 1.1 but it will get me to most of the sites the SE/30 is...

Oh yeah, I'm using open transport on Mac OS 8.0 currently. Chuck E

I'm trying to get my Asante network card to work with my SE/30. I am using an Apple AirPort Extreme router, the tall kind not the flat one. And I have set the network settings as shown in the picture. I can see it on my network with my Mac Studio using a program called iNet Network Scanner but...

That's actually what I was doing wrong, I was trying to go straight to an 8.1 install, instead of installing 8.0 first. Today I installed the internal blue scuzzy and was able to successfully create a clean install of 8.0. Tomorrow I will try to update it to 8.1. 8.0 at least is not that bad...

I've been trying to figure out how to get the desktop version of the BlueSCSI mounted, while bringing the SD card interface outside the Mac SE/30's case, and this was my solution. The AUI interface on my Asante MacCon is a daughter board, so I simply removed that daughter board and ran an...

Very good, I got it to download and stuck it on my micro SD card and booted from the external BlueSCSI. It booted up just fine in 8.1 and I moved the 7.3 system file to a different drive image and was able to boot from it. Are all the other folders on that image from the eight point one...

Thanks! I'll give it a try.

Will the Legacy Recovery CD boot at all without editing the system files for the SE/30 with An upgraded 32 bit clean ROM? I would think you just be able to mount it using BlueSCSI and maybe run an Installer from it, but if I try to install 8.1 aren't I just going to run into the same problem I...

I've tried both there Quadri 900 and the Mac IIci with Basilisk II, what I can't figure out is how to get the Mac OS 8.1 CD iso to mount in Basilisk, with my BlueSCSI I just put it in there as "CD3 Mac OS 8.1.iso" and it mounts, but if I try to load it from the Basilisk II GUI, I point it at...

Never Say never ;-)

I can give that a try, I have Basilisk II installed on my Mac studio, I use it to copy files back-and-forth between the Mac studio Add my BlueSCSI drive images. What options should I choose in the Basilisk II GUI? There are only two Mac types available, The Quadra 900 and the Mac IIci, there are...