Search results

Thanks! Yes, hence the slight gap either side. But since the LCD is much lighter than the CRT, there's enough friction even with the knobs not fully tightened. Yeah... as you can see in the pic, even the original CRT stand color is not a match for this //c. My end goal is to use this with my...

Update... thanks to an inspiring link to a //c iPad mount sent to me by @wottle... I've been able to blend - well, hack in my slicer! - the two together and make a test print of the //c CRT stand mount I had in my head. Since I've not disassembled the LCD yet, I used a handy 5 1/4" diskette box...

So I decided to do a little hacking about on the bezel... sorry @ArjenCNX, hope you won't mind! First I cut off most of the bezel in my slicer, and then removed about 9.5mm from both ends of the 'mount'. Here's what it came to before slicing. ...then printed... ...then a test fit...

Ohh... I'll be happy to provide more pics and measurements. And I have a 3D printer to help with the prototyping. :-)

Following up on this... I do think it would be possible without too much hassle. Here are some pictures of the original stand components... First, the part that mounts onto the bottom of the CRT : As you can see, its just over 121mm wide. Looking at your front bezel, that equivalent part...

You might try this - https://www.printables.com/model/974484-powerbook-1xx-battery

.. or UbiTalk for short? 🤔

UbiquiTalk? 🤣

Timing could have been better. I was simply trying to offer the OP a recoup on whatever he'd sunk into it. As I said, I've regularly loaned out or passed on rare items to fuel the reversing efforts, and being on the other side of the pond (tho I also have a US address) makes it easier (and more...

Perhaps you should consider that many of my 'private collection' items have been loaned to other MLAers - including one you've mentioned - for this very purpose. From what I've read, it's a modified IIfx logic board that is what's needed here for reversing.

Well... I have a IIfx and woukd be happy to have it off you - on the chance someone, someday manages to reverse the PAL. Feel free to DM me if you're interested.

Perhaps a dumb question, but you know what they say about that... @Capt_Redbeard - you say you acquired the card in an auction... was there a Mac IIfx also in that auction at the same time - or previously on that auction site? Which auction site / provider was it?

:ROFLMAO:

:ROFLMAO: And now the down-under MLA'rs are working that out! :)

Nice one! :love:

@ashleigh__ agree wirh @cheesestraws VERY nicely done! I have 2 Cubes but only one 'good' PSU. Great to see an alternate power option!

That's a 'glass'(?) capacitor, not a resistor. If you move the broken bits, you see the C36 silkscreen.

:love:

Many years ago, I got into restoring broken / unresponsive G5 PMs when they were still making reasonable £s 2nd hand. Many had failed with similar symptoms to the above, so it wasn't a bad earner getting them going again and moving on for a small profit. What I discovered (as did the PM G5...

@jalfrezi - I may have missed it, but I don't believe you've answered this?