Search results

On these older machines when they don’t boot up from ROM and instead have OpenFirmware boot an OS, OF defaults to outputting on the serial port and thus provides no video. I can’t remember off the top of my head on how to change it without XPostFacto, but I’d take a guess on that being the cause...

I’ve used a 9500 PSU with my 8100 and it works. So i imagine an 8500 which is quite similar should work too.

Also interested in one for my MDD.

I don't suppose you've tried adding MacsBug to your 7.6.1 install? I'm wondering if that would give us more information as to what is triggering the Bus Error?

Okay I can confirm that these drivers do work for my card and it's working great now!~ :)

Okay not sure if I was looking at an old copy of the Mac Driver Museum, but this one has the driver: https://vintageapple.org/macdrivers/nic/cabletron.sit I think this is more geared towards Cabletron Cards for SE/30 but I -think- it has stuff for the E6xx cards, I'll test this out and report...

Ah slight snag, the Mac Driver Museum just has a link to ftp.ctron.com which is obviously down and Wayback didn't crawl FTP sites. :/

I have, it seems that 'Ethertalk/Ethernet' shows up in MacTCP and Network control panel, but when patched into a switch with auto-negotiation turned off and set to 10Mbps, the link never comes up and AppleTalk fails to enable for the card. Granted the card may be damaged, the other two are...

Hey folks, I've come into possession of three CableTron E6110-X NuBus ethernet cards. However, it seems that the drivers for these are unobtanium, I don't suppose anyone has the driver installer for these? Pics of this cards are up on the Higher Intellect Wiki...

Can't comment on the polarity except that in my experience that with most peripherals they are usually center positive. Re. the amps, any power supply that can do 1.5A or more would be fine. So you'd be fine using a 2A and so forth, it's just indicative of current capacity of that supply.

Alrighty, this is definitely some kind of power issue. The card seems to be -very- sensitive over sufficient power delivery. So in my 9600 I took out four other PCI cards before I put in the PC Compatibility card. Yup, all looking good, working fine. I put those four other cards back in, PC Card...

Well, the story got even stranger. Because it's stopped working on the 7600 now. I tried it across different versions of the Mac OS, nada, didn't work. Same issue that hit the 4400. So just for a crapshoot, I put it in my 9600, lo and behold it works right off the bat. Surely the odds of this...

Y-Cable obtained and yup, as suspected it works fine in the 7600. So tl;dr 4400's PSU is rubbish haha.

Okay, I think I've figured it out. It's the 4400's PSU not chucking out enough juice. I don't have the Y-Cable so I can't 'easily' try this in another machine so I put the card in my 7600 and routed the audio thru the 4400. Sure enough the 7600 was able to power up the card, and I got a POST...

Bah, no luck on replacing the cap, new 1nF cap in at C111 and no change, the new cap didn't explode. I've replaced a few of the electrolytics around the CPU to no avail. I'm wondering if the CPU itself is kaput. :/ I don't really have a good scope to read out the signals from this card. I might...

Sorry for digging up an old thread but I have a OrangePC 210(?) which a Cyrix 486 DX2 66. OrangePC gives me error 11 when launching with both the PowerPC card on or off and on both 8.1 and 7.5.3. Don’t suppose anyone has any particular insight into this error? I have this installed in a Quadra...

Well, the card is still detected by the computer and even tries to start up the PC. It -appears- that the PC does start but acts as if there’s no CPU there at all. If the CPU isn’t getting a stable voltage it’d cause that symptom I would’a thought. Given I think that this cap is involved with a...

Well found out why I might be having issues. Cap C111 appears to have gone 'bang'. I don't suppose any kind soul would be willing to help me get the capacitance value? Other white caps in the area all appear to be marked 'A5' if that gives any clues? I'm thinking from a cursory Google Search of...

Well when it works it handles Windows just fine, I actually run Win98SE on mine with good results. Unfortunately it is proving rather temperamental and will just up and not work sometime. I note that this card has a bunch of electrolytic caps, so I wonder if they may be falling under spec. I'll...