Recent content by superseth

So I have done a lot of connecting VGA monitors to Vintage Macs using adapters, but what about using some of these old CRT's I have with a modern machine? Has anyone cooked up a solution for getting 1152×870 at 67hz on the right pins?

Just here to say that I am interested in whatever gets cooked up here!

Hello one and all! I recently came into one of these cards as well and agree that the port placement is super puzzling! It doesn't really fit on any machine I currently have around. I figured that the missing DB9 Port was for monochrome displays like the Radius Full Page. Anyway my card...

My ultimate goal here is to get 4 of these guys going at once.

Ok so I have done some more research (moving cards around, different monitors etc) and it seems to be something with how the Apple branded cards detect displays. I have one official apple cable for these Two Page Displays with the 13W3 connectors and built 2 others using this awesome project -...

Seems there was some discussion of this in another thread that throws into doubt the wattage info on EveryMac. https://68kmla.org/bb/index.php?threads/mac-quadra-950-nubus-slot-position-for-a-graphic-card.40011/ I can try them in different slots to see if that mixes things up. Good to know it...

I haven't recapped the PSU but I only have 1 drive in there. I am curious of the source for this info and how I can know the power requirementes of a Nubus card.

I am curious if anyone has documentation on how may displays you can connect to a Quadra 950 at one time. I currently have 2 Nubus Cards that support normal video modes (Apple 8-24 and SuperMac Something Something) and a Radisu Full Page Display card. When I plug in monitors to BOTH NUBUS...

I am using the BMOW adapter, I'll take a look at the docs more tonight!

I was wondering the same thing - it is possible there are some later applications like iTunes or something that require 9.2 but at this moment I don't recall.

I recall a few of the G3 upgrade cards Sonnet shipped stated in the manual that they only worked up to 9.1. It is possible people found workarounds later, but in general at the time I recall 9.1 being the ceiling for anything Pre-G3.

I too am on a quest for CL_SEA_PL.sea.hqx

I too would be interested in ordering a kit when they become available again

The green display issue I get is exactly like what happened to Action Retro here - Anyone run into this before other than us?

Just wanted to report back that yes - replacing the missing fuse with SMD125F-2 as finkmac noted fixed my ADB!