Recent content by mkinn

Update: Found and bought 2 Crucial CT32M64S4W7E 16F 256MB PC133 SODIMM's, for the 512Mb max, works perfectly, $20.00 ea on eBay. Now looking for a good deal on a DVD drive and Cardbus DVD decoder card. Will be trying a Lucent Orinoco Gold WiFi card and a USB X 2 PCMCIA card soon. Will post results.

Dear Mr. Chadwick I have 2 Apple PDQ 300 Mhz Wallstreets, and would like to build new PRAM batteries for them. Do you know a source for those PCB's for the VL2330 batteries? I found the Keystone 534-3005 holders on Mouser. I found them on Digikey, very expensive! Thank you for your time!

Sorry, I forgot to mention the LocalTalk bridge (control panel) which will run on any pre-Lombard Powerbook that has RJ45 Ethernet. 2400c, 3500C, Wallstreet. That is one way to connect your 8 Pin Din AppleTalk port to a RJ45 TCP/IP network.

I only paid $8.70 each for mine (new) and can always use them elsewhere. I don't use this machine very often. I did find two 256 MB modules with 8 IC's each for $50.00. Should work, but not a great deal. But thanks for your great idea! I'll keep looking for a good deal on two 512 MB modules...

Just bought 2 new Samsung 256MB 3.3V PC133 144 pin non-ecc SDRAM SODIMM modules, installed them, and only got 256MB instead of 512MB. Working fine for 2 hours so far. I read something about needing low density memory modules, but I cannot find any. Is there anybody selling these? Anybody want...

I use A2Server on a Raspberry Pi 2b. Everything on my network can see it, Apple IIgs - Mini, Win7 - Win10. If you want, you can mount M.2 drives to it with adapters for very large drives.

Anybody find a fix for a Wallstreet 233 or PDQ freezing when copying to the PCMCIA CF card yet? Works fine with extensions off. No CD or floppy. Tried resetting the PRAM 4 consecutive times. Once I put the CF card on an adapter in the HD cage on the PATA bus, it works fine, but I just wanted to...

Any fix for a Wallstreet 233 freezing when copying to the PCMCIA CF card yet? Works fine with extensions off. No CD or floppy. Tried resetting the PRAM 4 consecutive times. Once I put the CF card on an adapter in the HD cage on the PATA bus, it works fine, but I just wanted to be able to use the...

Does ANYBODY have a pinout/wiring diagram for the 3400c battery? Since you took one apart, I was hoping you might have taken note of the wiring to the external terminals, and might have some idea what each one does? The = and - terminals on the pack don't seem to have any voltage on them, just...

Does ANYBODY have a pinout/wiring diagram for the 3400c battery? I'd like to try rebuilding one. My current battery works with 4 LED's when you press the check button on the side, but i am SURE it WILL FAIL at some point in the not-too-distant-future. I've looked everywhere. The = and - symbols...

Does ANYBODY have a pinout/wiring diagram for the 3400c battery? I'd like to try rebuilding one.

Replaced the 3.6VDC Lithium Battery, + toward the back, keeps time perfectly, but won't save Baud rate changes or Mouse tracking speed settings. I press Return after changes to save, but they're gone after a power cycle or reboot. Same for CDA/NDA changes. No mention of this in Owner's or any...

I found the driver Here: http://semantic.gs/apple_imagewriter_ii_driver_download_2016 found the cable here...

Found the Imagewriter II/LQ Appletalk networking disc there, but not the 3 discs which came with the printer there. Thank you VERY MUCH for that one! Were any of these discs included on the Developer series CD's?

I own 3 of these printers, one with the network option, and I need to install these discs to make them work. Any help, images, download locations welcome. Have Paypal and Visa, whatever you want, or trade for.