• Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.

Recent content by marchie

  1. M

    Macintosh SE/30 Upgrades (Early Christmas)

    The simm supports are genius. It will put the ram in the right spot even if the clips are broken?
  2. M

    A/UX 3.1.1 open source packages

    I see this has OpenSSH version 5 from 2008. anyone compile something newer?
  3. M

    Dual PDS in SE

    Oooh I didn’t realize the SE wasn’t already prepared for this. I knew the SE30 was….
  4. M

    THAT'S not an error I've seen before...

    Replaced RAM on the board. Still get a bus error when the Init tries to load. No clue at this point. I'll be replacing the lithium NVRAM battery with a MacBatt that came in the mail yesterday, then decide if I'm going to continue to try and make that accelerator work, or remove it and work it...
  5. M

    Dual PDS in SE

    Is someone making new PDS riser cards that would let us put more than one card in an SE? YES, I know I likely need to remove a drive or two. I've done that, as I'm using an external BlueSCSI for drive purposes. I have an Accelerator card in an SE already and would like to add the ethernet...
  6. M

    Macintosh SE M5010 - Restoration

    So..I have an SE with soldered in PRAM battery. I’m going to clip it out and solder in a MacBatt to get away from the lithium potential leak. Why did you choose the battery and holdrr?
  7. M

    Of stuffit and resource forks

    Yup! Figured that out a few hours ago. Sadly it looks like the NewLife board is... Funky. I suspect bad RAM.
  8. M

    THAT'S not an error I've seen before...

    Alright... So the accelerator board is not working. The memory is not activating (it has 16MB on it and the system only sees the 4mb on the motherboard board). And I get a bus error when the Init tries to load for extra controls, in both system 7.1.1 and 6.0.8 I'm going to have to open it up...
  9. M

    Of stuffit and resource forks

    I do! It's installed in my "SE Faux 30" An SE motherboard, with the NewLife 16mhz 68030 W/ FPU card, in an SE/30 case (because this has the good screen)
  10. M

    Of stuffit and resource forks

    I've got an intel iMac. And for me, this seems the least painful? Download the files I want directly to the SD card, and then manipulate everything in the destination environment
  11. M

    Of stuffit and resource forks

    Well, I figured it out... For some reason, when I unzip the file with stuffit, the file types are wrong. ResEdit to dImg and dCpy fixes it.
  12. M

    Of stuffit and resource forks

    Copying them via the BlueSCSI toolbox on the SE itself.
  13. M

    Of stuffit and resource forks

    Ok... I managed to get stuffit 4 installed. And I have just about every disk image utility known to Apple installed... I'm thinking the .dsk file at this link is funky: https://www.savagetaylor.com/2023/01/17/68k-accelerators-newlife-computer-corporation/#nl16se That has the drivers for the...
  14. M

    Of stuffit and resource forks

    thanks for that... With the Recovery disk from Apple, I'm pretty sure I can get the Asante EN/SC working, and just download directly the rest of anything I need.
  15. M

    Of stuffit and resource forks

    Ok... I either need a premade .hda file for my BlueSCSI that has some tools in it (like stuff it expander), or I need to know what the file type is for a SEA file so I can edit with ResEdit and get my stuff it .sea file working. I've got a bunch of .sit files ready to go....
See more
Back
Top