killvore's latest activity
-
killvore replied to the thread Quadra 700 Mainboard in IIcx case ....It should fit, I put a 7100 board in a IIci case and it works great, lines up with the PSU and everything. You need to dremel some room... -
-
killvore replied to the thread Power Macintosh 7200/90 L2 Cache.Ha that's right! Hope the Adjustable Keyboard and the HPV card is still working - I hadn't recapped it iirc 😅 I saw a PCI firewire card...
-
killvore replied to the thread Power Macintosh 7200/90 L2 Cache.The G4 QS boots OS9 natively as well, so you don't have to use OSX if you don't want to 😄
-
killvore replied to the thread Power Macintosh 7200/90 L2 Cache.System 7.6.1 with Speed Doubler runs really fast even on the PPC 601. Absolutely worth giving it a whirl even if you don't stick with...
-
killvore replied to the thread Performa 6400 Capacitors / Recapping.I have a 5400 board, and the macdat image matches the one I have. However, mine does not have the set of empty pads between the marked...
-
killvore replied to the thread Mac 9500 PCI snaptastic plastics question.Oof, that's a rough plastic period for sure! I don't have many machines from that period (partially for this exact reason), I have had...
-
killvore replied to the thread Any must-try software for the Performa 475?.Hey, first off congratulations! You have a solid machine on your hands - and it is understandable that navigating the rapidly evolving...
-
killvore replied to the thread Doom on SoftPC on an SE/30?.You're absolutely right - I was thinking about it in the context of a single thread where it's bad enough, but this attitude is not...
-
killvore replied to the thread Doom on SoftPC on an SE/30?.I find it's usually best to just ignore him when he's having one of his conniptions ;)
-
killvore replied to the thread Doom on SoftPC on an SE/30?.This is rad as hell! Also seconding the "what if the terrible 68k Mac ports became Actually Good" (looking at you, Wolfenstein and Doom...
-
killvore replied to the thread Took a chance, now what.I kept one in a IIci-case - it fit fine after some dremeling to make room for the different ports, and got an ATX extender and...
-
-
killvore replied to the thread Rare PCI card.I have a simular card from the same company which also has a 68020, but its a NuBus-version. It was sitting in a Quadra 650 - I'll see...
-
-
killvore replied to the thread Finally found a 1MB L2 cache for my 6100.Nice! Yes, I'll get it taped over - or actually make it part of the 3D print model on the next pass :cool: I don't know which way the...
-
killvore replied to the thread Finally found a 1MB L2 cache for my 6100.Nono I run it with the lid on - I took it off to show the setup! The air comes in from the vent at the bottom under the hard drive bay...
-
killvore replied to the thread Finally found a 1MB L2 cache for my 6100.Thank you for the great analysis! 1. The Finder scrolling is me just holding the mouse button down on the "scroll down"-button in the...
-
