Recent content by Joopmac

Congratulations, nice

Instead for the PB100 I’d love one for 5120-5126🤠 Edit: Trash we have the same pipe dream;)

Awesome stuff would this be, looking forward…!

Which PCB would that be, Builder68? =) Is it available here?

hey guys, i still have the boards in JLCPCB packaging, a lot of Apple projects and stuff came in my way the last months=) I am also procrastinating because i have a hope of combo SCSI/Rominator/68030 board and to build it at once

Pure copper Heatsink with printed duct, decent paste under it. The temperature is not the issue The resistor has been moved Yes I have farallon ethernet cases in all, btw! Curious if i lose 48mhz when i pull the card My previous reply i ment slower ram with “more ns” instead of “less ns”, for...

I have 4x 475, they are stable at: 38mhz with bolle’s diimocache 43mhz 47mhz 48mhz They all have the 88920 swapped (from the same production/batch) Varying VRAM/RAM simm speeds but that is not the limiting factor, when I swap simms (or cpus) the results stays the same Even onboard has...

I believed this was because the scrollbar position is calculated as a fractional value representing the amount of the window size visible to the total content height. Please educate me if i'm wrong, this of course might be a myth that i learnt when i was a little young Joopmac back in the days...

Even scrolling in the Finder is speedier with FPU, I’d keep it ;)

Smaller, and thinner with QFP package CPU would be sweeet =) I like socketless

The result is a bit like this one! https://github.com/hkzlab/MiniPerformerPlus/blob/master/pics/accel_installed.jpg

Nice pdfs, downloaded =) I would love more details about the printing workflow! I also like to connect my stuff like this!

Of course. More amperage is always OK

https://www.factorled.com/en/24v-power/2930-power-supply-24v-200w-83a-tecmo-gxtronic-8435612961784.html this might be interesting, GaN based

Nearing completion with just a GaN PSU