indibil's latest activity
-
indibil replied to the thread PowerMac G4 MDD unstable after bus speed mod.Sorry, I understood that you were using the 867 set to 1ghz. Lost in translation 😅 -
indibil replied to the thread PowerMac G4 MDD unstable after bus speed mod.Sometimes the Vcore isn't enough. If you don't want to drop to 933, try increasing the Vcore by 0.05V or 0.1V. What's your current...
-
indibil replied to the thread PowerMac G4 MDD unstable after bus speed mod.Have you tried lowering the CPU to 933MHz?
-
indibil replied to the thread Radeon 9100 that I can't flash.@joevt You've given me a lot to think about, and I finally figured out where the difference lies between "test1" and the rest...
-
-
indibil replied to the thread Radeon 9100 that I can't flash.Yes, I always write the EEPROM to the TL866, sometimes to new ones. It's a process I've done many times, with other graphics cards and...
-
indibil replied to the thread Radeon 9100 that I can't flash.I can't say for sure what happened to the original PC dump, but regarding EEPROM writing, I always perform a verification after writing...
-
indibil replied to the thread Radeon 9100 that I can't flash.Hello. I tested both 64kb ROMs, and the result is similar to the initial one. Test 1 seemed to provide information, although it wasn't...
-
-
indibil replied to the thread Radeon 9100 that I can't flash.Hi, I'm going to test this new ROM. To clarify: PC ROM 64kb Lila.BIN is a dump of the original EEPROM that came with the graphics card...
-
indibil replied to the thread Radeon 9100 that I can't flash.@joevt, here's a summary of the test1 results. First, I booted as usual, with the Radeon 9100 without a display, alongside an ATI Rage...
-
-
indibil replied to the thread Radeon 9100 that I can't flash.All those dumps were made by removing the EEPROM and reading with a TL866. The contents of "PC ROM 64kb Lila.BIN" are exactly as read by...
-
indibil replied to the thread Radeon 9100 that I can't flash.Hi @joevt , it's working now, I followed your steps. But, could it be that it's not reading the EEPROM but the information from the GPU...
-
-
indibil replied to the thread Radeon 9100 that I can't flash.I took a few minutes to test this out before getting down to my weekend work. I tried displaying the .properties in OF, but I'm not...
-
-
indibil replied to the thread Radeon 9100 that I can't flash.The PCB doesn't look like any of the other 8500/9100 boards I have; the others use M25P10s. I can try to check for continuity at U2, but...
-
indibil replied to the thread Radeon 9100 that I can't flash.Okay, let's see if I have time this weekend to investigate further. Perhaps it would be possible to replace the EEPROM with an M25P10...
-
-
indibil replied to the thread Radeon 9100 that I can't flash.It appears that the EEPROM addressing passes through these ICs, which seem to be VCS74AK2R020, but I'm unable to find any datasheet with...
-
