Recent content by dochilli

If you know someone that has a ultrasonic cleaner, you could try a bath of the LB in the cleaner.

Perhaps here: https://www.macintoshrepository.org/7038-all-macintosh-roms-68k-ppc- You have to split these files for the SE in high and low rom.

If I remember it right, there is no -12V at SE/30 computers at the floppy port.

Thank you for sharing!

0002 means that there is a problem with the ram: The first small chunk of RAM failed. The Z field indicates which RAM Bit(s) failed. This small chunk of RAM is always in Bank B. Using $AABBCCDD as a guide: AA=8 bit mask for bits 31-24 BB=8 bit mask for bits 23-16 CC=8 bit mask for bits 15-8 DD=8...

I do not know if it could help, but in this website you can see some serial cables: http://www.applefool.com/se30/images/img/1yq5cpr6.png And this may be of interest too: http://www.applefool.com/se30/#serialdata Look at the part with „Serial data interlinks“

You have to recap the logic board. Then the sound problem might be solved.

If the classic shows some signs of life, you can measure the voltages at the floppy port. There should be +5 and +12 V. 5V should be 4.85V for booting. If the analog board is the problem, then there are some more parts than the capacitors that can be defect. Most often: DP3 and DP4 (1N4148)...

04 means: The ram test failed while testing bank A.

Perhaps this one? https://amigaofrochester.com/bluescsi-premade-images/ Or this one? https://macintoshgarden.org/apps/bluescsi

The new image has the functionality to print to a modern printer. I was successful with printing to a HP MFC Laserprinter from a CC and a SE/30. Thanks to Mactjaap for his update.

The SE/30 has no -12V at the floppy port, so that is ok.

I wrote the image to another sd card. Now I can login as root, the keyboard is ok. The password raspberry for the user pi does not work, but I could change it as root. A user macipgw does not exist, only a user timelord and pi. My windows computer can see the maciprpi and the shared drive. By...

I can choose another user but when I try to type the username or the password, I only get arabic letters. I can not write roman letters. Then the password is wrong. I saw that I am typing arabic letters, when i tried to change the user by typing the name. In the attached picture I typed pi.

I installed the image on a SD-card. The pi boots, but when I want to log in as user pi, my keyboard just shows "arabic" letters, so the password is wrong. Could it be that the keyboard is not set to english?I have to look, if I can log in by ssh and change the keyboard settings of my pi.