Recent content by BadGoldEagle

That I'm not so sure. I chose the 630 because of its strong 5V power output but this mod is theoretically compatible with anything that has an ATX 22/24 plug. >33 Amps for 5V is nearly unobtainable these days. But there are plenty of PSUs with 25A outputs.

You pulled up the data sheet for the 630H and not the "regular" 630, that's why ;) I would only recommend the latter for the mod, as the 630H can only do 16A on the 5V rail instead of the 630's 35A. Only caveat, it needs at least 500mA on the 12V rail to be happy.

Hi @robin-fo ! It will work without it but I noticed that the Bicker PSU was having to work harder (and therefore hotter) in order to keep things going. So for stability/longevity reasons, it's better to have a load resistor when using newer fans... There are only four scenarios: - Solid State...

Okay, so the resistor is heating up quite a bit and since space (or rather lack thereof) is a problem, the only safe place to stick it in place would be at the back, where the exhaust is... But even a Noctua industrialPPC at full speed will not reach that far. So we would need another one like...

DC Board Update Wirewound resistor (Digikey Link, I just bought one from Farnell, also available on Mouser but not on Arrow at the moment) + Can be placed anywhere (not only on the PCB itself). Ideally close to the fan where it does not interfere with the PSU's heatsinks. + Should be way over...

Notifications are on but I wasn't made aware of any activity. Happy to see someone else working on this project! One thing to keep in mind @WillJac PLEASE double check the pinout on the Quadra side before you plug it in! The cables were meant to be soldered without a header and I am pretty...

The thing is, I don't think there is a particular setup that makes sense for all non-AINSI users. I am familiar with three layouts: QWERTZ (German), AZERTY (French) and to get out of a pickle when for example the tilde key is hardcoded to some function (console for example), the US AINSI...

@Crutch The CD Access bug is not present on real hardware. No idea why it causes Basilisk to crash with that extension enabled. I use the same HD image... Looking forward to the next version! Hopefully with the White Box fix and (?) with adjustable keyboard shortcuts, as using it with anything...

Correct! I also have LiteSwitch (pretty awesome... allows you to switch between apps with Cmd-Tab) but it was not the issue. My problem was caused by Apple's Photo CD Access extension. Once removed it works fine in Basilisk. Again, I'll have to try on a real Mac soon to verify that! @Crutch Do...

Just wow! From an idea to functioning code working on an old Mac in how long? :) Even more impressed! Will have to try out on the SE/30 on Saturday. On Basilisk, if I set the keyboard to the US Layout, I get a bomb with the unimplemented trap error. But at least the popup is there! This is...

Wow, again I'm impressed @Crutch ! My target system is 7.5.1 (I never upgraded my SE/30's original install), I know there's been some important under the hood changes between 7.5.1 and 7.5.5 but I don't remember if sound was modified... The main system volume would make the most sense, and if...

Hello everyone, Looking for an extension which lets you turn the volume up/down using key combinations. I found a few programs that could do the job, but I am pretty sure I've seen one in the past that had a OSX-like overlay like this: Other suitable programs for reference...

I never paid that much attention to SE Serials, but now that you mention it, here's what I've got SE FDHD that was officially upgraded to an SE/30 - CK0020SPB02. The label at the back is, as you showed in your post, special to this upgrade. SE FDHD (non upgraded) - CK017341B01 SE 1/20 (bought...

Amazing work! just my 2 cents: 1/ Some Micons had a toggle at the back to switch between the internal and external display. Could this be implemented in @GeekDot's new ROM? Sign me up for two of these if you can manage that! I'd love to set up one of my SE/30s with the 50MHz 030 and a color...

Success! The switch fits the opening! It almost looks like it's meant to be there from the factory. There's only one small inconvenience: the tabs on the switch are slightly narrower compared to the ones Apple/Delta used. In order to keep things as simple as possible (and to prevent...