Upgrading from G3 to G4 in my 7600/132.

[Solvalou]

I need a hand as I had bought a 9600 tower from eBay and I havn't the space for it so I had given the basic tower away and kept some of the cards. One of which is a Sonnet Crescendo G4 450/1M which will fit my 7600 fine. However, it has a 400Mhz G3 card installed currently (XLR8) and swapping them over doesn't make it boot from the get go. I looked on the Sonnet website and it says there needs to be software installed before you install the card. Mine didn't come with any and I am curious where do I get this software from (if I still can)?

Thanks in advance.

 

[Macdrone]

Sonnet website or google search it Is what I did. You have to load the software before you install the new card

 

[waynestewart]

This may be the software you need

http://mac.softpedia.com/get/Drivers/Sonnet-Crescendo-Encore.shtml

 

[bibilit]

I probably have the software,so if still in need can get this for you.

 

[ClassicHasClass]

I have the enabler here:

gopher://gopher.floodgap.com/1/archive/by-request/classic-mac

 

[Solvalou]

Thanks guys. bibilit , if you have a spare CD/floppy around or can make a copy that would be even better but if not i'm sure I can get this on the 7600 somehow.

 

[bibilit]

I can provide a copy if required, just let me know.