bluekatt
Well-known member
i have a 12 inch ibook G3 800 mhz who has ( surprise surprise ) the dreaded logic board failure desease its running now with a shim made of 2 cd's who are so large the under side is bulging ( that cant be good ) and i plan to either make a proper metal shim or reach for the cleaning alcohol and see if i can reflow the solder ( il kil it is more likley )
but i can get a 600 mhz ibook with a wonky electrical connector and a crack in the screen for 125
it slogic board is how ever solid i have seen it boot up and it runs fine until the connector is touched and the ibook dies again
is it possible to swap the logic board of the 600 out in to the 800 mhz or are they incompatible ?
or for that matter is it possible with a 500 too ?
but i can get a 600 mhz ibook with a wonky electrical connector and a crack in the screen for 125
it slogic board is how ever solid i have seen it boot up and it runs fine until the connector is touched and the ibook dies again
is it possible to swap the logic board of the 600 out in to the 800 mhz or are they incompatible ?
or for that matter is it possible with a 500 too ?