cheesestraws
Well-known member
If you want to wire this up to netatalk on a pi or similar directly, I'd recommend having a look at the following code, which may still work. This is the Linux driver for the LocalTalk PC Card. It works by decapitating the incoming LocalTalk frames and generating fake ethernet frames.
Personally, I think my first approach would be to try to do the same; adapt this algorithm to process packets, read and write them from a tap interface's file descriptor, then wire up netatalk to the tap as it if were to a localtalk card, and see what happens.
Personally, I think my first approach would be to try to do the same; adapt this algorithm to process packets, read and write them from a tap interface's file descriptor, then wire up netatalk to the tap as it if were to a localtalk card, and see what happens.