elemenoh
Well-known member
I have a StyleWriter that would power up for a couple of seconds and then power off. Tearing it apart revealed leaking caps on the logic board. Here's a map and Digikey cart in case it's helpful to others.
https://www.digikey.com/short/z829n5
In my case, the 100µF caps looked worst and I happened to have them on hand. After replacing them, the printer powered up okay.
https://www.digikey.com/short/z829n5
In my case, the 100µF caps looked worst and I happened to have them on hand. After replacing them, the printer powered up okay.
Last edited by a moderator: