OleLila
Well-known member
Not apple but Atari related, but a conquest, at least for me. It may give additional motivation to attempt (again) a reconstruction of the LCD ribbon for a 180c.
Anyway...aside from the center ground of the FPGA (which I couldn't see but assumed I melted with a heat gun), this was all soldered by hand, closely inspected with magnifying glasses and bridges removed with braid and flux and iron.
Anyway...aside from the center ground of the FPGA (which I couldn't see but assumed I melted with a heat gun), this was all soldered by hand, closely inspected with magnifying glasses and bridges removed with braid and flux and iron.