fimbulvetr
Well-known member
I am having a weird problem with my SE/30 and an Asante ethernet card... I know the ethernet card works, as I it was working in the SE/30 I pulled it from (the SCSI chip failed on that one, and I don't have the skills to replace it). When I put it in my other SE/30, I the normal chord and a happy mac at startup, then it hangs at the happy mac and I get a two-tone "ta-da" chord, followed by the four-tone low-to-high test chord. Then the computer hangs indefinitely, but when I reboot with the programmer's key it it starts fine, no hangs, no weird tones. The Asante card test from the installation disk runs fine, so the network card is working. The computer restarts fine on any subsequent soft reboots, but if I shut down and restart I have to go through the whole two-step reboot process again. I am running system 7.1, Asante driver is 5.1.2, and I have 32 Mb ram installed on the machine.
Any ideas what might be going on? Thanks!
Any ideas what might be going on? Thanks!