• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

Power Mac 8600 & ATI Rage 128 Mac Edition PCI

dcr

Well-known member
Does anyone know if the ATI Rage 128 Mac Edition PCI would be compatible with a Power Mac 8600?  All I've been able to find online is that it requires Mac OS 8.0 or higher and a 33 MHz or 66 MHz PCI slot.  A PM 8600 can run Mac OS 8 or higher, so no problem there, but I've not found anything on the MHz of the PCI slot.

 

jessenator

Well-known member
You should be able to get it to run on 7.6.1 (possibly 7.5.5?) even, with the system 7 ATi drivers. I've run mine on a Power Macintosh 4400 running 7.6.1, so it should be just dandy on your 8600. PCI slots on Power Macs are at least 33 so that shouldn't be an issue.

 
Last edited by a moderator:

jessenator

Well-known member
No prob! I don't recall if it just works on 9.1 without the extra drivers (I think it's in ROM of the Mac-spec version). I think if you wanted to do some acceleration, you might need the updated ATi drivers… like running GL Quake or something like that.

But for normal runaround use you should be good. Pop open the extensions manager and see what ATi drivers are running (and to disable the Nvidia ones, since they often just plastered everything in on a universal install).

 
Top