• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

Need help designing a PCB/Recreating one.

jajan547

Well-known member
Hello everyone I am trying to replicate a ROM PCB I have all of the chips and even the socket needed for the ROM chip, however I have no experience with designing a PCB and really need help from someone with more experience or if someone is willing to design or replicate it for me I would be more than grateful.
 

trag

Well-known member
Hello everyone I am trying to replicate a ROM PCB I have all of the chips and even the socket needed for the ROM chip, however I have no experience with designing a PCB and really need help from someone with more experience or if someone is willing to design or replicate it for me I would be more than grateful.

Which machine does the ROM go with?

A number of ROM modules have already been designed, so the work may already be done.
 

trag

Well-known member
Hopefully you're getting help from @360alaska but in any case you might throw a scan of both sides of the ROM up here. That way we can see if it looks like any of the ROM modules that are already designed.
 

360alaska

Well-known member
I told home that basically one will have to be disassembled, then I can make a schematic and then a pcb.
 
Top