mooseman
Member
My Mac Portable has been recapped and boots up fine from floppy or Floppy Emu. It's got a rebuilt lead-acid battery in it that's good as well.
I'm trying to get it to work with ZuluSCSI and no-go. With the ZuluSCSI plugged in nothing happens when I try to start up the machine: no lights on the card, no chime, everything's dead. As soon as I unplug the ZuluSCSI I get a chime and it boots. I'm using a 34-50 pin adapter from eBay, molex power connector is left disconnected.
Not sure what's going on here, seems like an insufficient power problem? All the guides I'm finding are for SCSI2SD and I'm not finding a lot of details on ZuluSCSI, but it should at least be powering up regardless of what's on the SD card. Anyone dealt with this, and am I missing anything obvious?
I've got the adapter mounted with the 34-pin connector pointing up relative to the top of the card, which I am 90% sure is correct. Thanks for any help.
I'm trying to get it to work with ZuluSCSI and no-go. With the ZuluSCSI plugged in nothing happens when I try to start up the machine: no lights on the card, no chime, everything's dead. As soon as I unplug the ZuluSCSI I get a chime and it boots. I'm using a 34-50 pin adapter from eBay, molex power connector is left disconnected.
Not sure what's going on here, seems like an insufficient power problem? All the guides I'm finding are for SCSI2SD and I'm not finding a lot of details on ZuluSCSI, but it should at least be powering up regardless of what's on the SD card. Anyone dealt with this, and am I missing anything obvious?
I've got the adapter mounted with the 34-pin connector pointing up relative to the top of the card, which I am 90% sure is correct. Thanks for any help.