• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

LCIII rebuild - recommendations welcome.

VMSZealot

Well-known member
I have an LCIII logic board (working), an LC PSU (unbranded, not working, but I'll have a crack at getting it going again, or rig up a new supply using its molex connector), floppy and an empty case, but I'm missing most other parts (including the floppy drive cable). Are there any particular fans that people recommend (silent as possible is what I'm thinking - it'll have an SSD in it, so the fan is the noisiest part), or speaker (better fidelity and more volume would be nice), still fitting in the same size.

All thoughts gratefully received.
 

Nixontheknight

Well-known member
If you want a good PSU for the LC, I recommend the mAcTX LC, it uses a picoATX and generates all the voltage rails the LC needs on the LC’s connector. You can buy SCSI cables online and I can ship you a spare floppy cable I took out of a Macintosh classic if you want it
 
Top