jmacz
Well-known member
Will do. I'm letting the clear coat sit for a bit as unlike previous times, I'm using an inkjet and want to ensure it doesn't wash out when I soak it for the transfer.
jmacz journey
- Thread starter jmacz
- Start date
Will do. I'm letting the clear coat sit for a bit as unlike previous times, I'm using an inkjet and want to ensure it doesn't wash out when I soak it for the transfer.
jmacz
Well-known member
I quickly 3D modeled the mini stand that comes with the M0401 and M1297 Apple RGB 13" monitors. I have an original part but my other monitors don't and I rarely see these included as they are easily lost/misplaced. The STL model is attached to the post in this thread.
Test print which fits and seems to work.
Test print which fits and seems to work.
Curious why you're changing the process when the previous decals have all come out so nicely?
jmacz
Well-known member
Not by choice. My laser finally broke down and currently only have two inkjets.
Ah, that sucks
How difficult are these to remove cleanly if it turns out to not be colourfast or whatever?
jmacz
Well-known member
Ah, that sucks
How difficult are these to remove cleanly if it turns out to not be colourfast or whatever?
Very easy to remove with no marks left behind.
jmacz
Well-known member
Prefer the laser as with the inkjet, I had to add a layer of acrylic clear coat and that caused the decal to be minutely thicker. This then prevents the edges from blending in more, even using micro sol. But still, it's ok. Ignore the shadow from my phone as I was taking the picture.
croissantking
Well-known member
Sir, you are an artist.
jmacz
Well-known member
Hmm, the previous water slide decal transfer sheets I was using (made for inkjets) required a clear coat spray to avoid smearing. Looks like there's newer transfer sheets now that have removed the need for the clear coat... interesting.
EDIT: nevermind, reviews are pretty bad on the clear version... it bleeds and has a bluish tint.
EDIT: nevermind, reviews are pretty bad on the clear version... it bleeds and has a bluish tint.
Last edited:
jmacz
Well-known member
I redid the decal using the InkJet again but this time using 3 light coats of acrylic clear (5 minutes between each). The result turned out much better. And looking at it again, I think this time it turned out better than the laser as the black is much darker/crisper than when I did it with toner.
jmacz
Well-known member
GorfTheChosen
Well-known member
Nice work ...
jmacz
Well-known member
Picked up another Fujitsu Magneto Optical drive... another 2.3GB one. This one works! I'm 3 for 5 now on eBay. Two working 2.3GB drives. One working 640MB drive. One busted 2.3GB drive. And a busted 640MB drive. Got a refund on the busted 640MB drive. Did not get a refund on the busted 2.3GB drive as I found out it didn't work with 2.3GB disks much too late (as it was working with 640MB disks). And now it's completely dead. Oh well.
Finally decided to jump in on the PowerBook Duo system. Picked up a working Duo 280c although it has a bunch of plastic issues and needs a full recapping. I will put up a thread with pictures when I'm done. Got an Apple mini dock as well, also needed plastic work and recapping. Having zero luck trying to find more memory for this thing but at least the unit I bought came with 12MB. But would love to have 24MB+. Somewhat tempted to buy a full 68040 and replace the LC in this unit (and overclock it) just to see if it would work.. but I need to fight that urge.
Finally decided to jump in on the PowerBook Duo system. Picked up a working Duo 280c although it has a bunch of plastic issues and needs a full recapping. I will put up a thread with pictures when I'm done. Got an Apple mini dock as well, also needed plastic work and recapping. Having zero luck trying to find more memory for this thing but at least the unit I bought came with 12MB. But would love to have 24MB+. Somewhat tempted to buy a full 68040 and replace the LC in this unit (and overclock it) just to see if it would work.. but I need to fight that urge.
croissantking
Well-known member
Do it
jmacz
Well-known member
Do it
must.. resist.. at least until I get this thing up and working first…
Curious, what paint did you use on this one? Looks different than the 700.
jmacz
Well-known member
Same one as always, no different from the 700. It's Stone Gray from Rustoleum.
