• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

Colour Classic strange noises/transformer replacement

robin-fo

Well-known member
Hi everybody,

My Colour Classic has some stange issues. When I plug it in and the AC switch is on, some crackling noises come from the inside. The noises are not very loud, but clearly noticeable. Otherwise, it runs fine since I recapped the LB. Furthermore, after letting it run for some time, I heard a sound like that of escaping steam (or rather like the ‘explosion‘ of a capacitor during desoldering).
But when I removed the analog board, there was no obvious damage on the caps… The only suspicious thing is one of the transformers, which possibly has melted sealant. I conclude that this sealant gets hot and escaping air from bubbles inside make the second noise I described above.

Does anybody know what the problem might be and how I cold solve it?

Is there a modern (or NOS) replacement transformer available?

Robin
 

Attachments

  • 0D8D3E93-FF70-48FD-A789-F787E898D3F5.jpeg
    0D8D3E93-FF70-48FD-A789-F787E898D3F5.jpeg
    3.7 MB · Views: 14
  • E363F639-341A-456F-9E2E-5F645D74EB52.jpeg
    E363F639-341A-456F-9E2E-5F645D74EB52.jpeg
    3.4 MB · Views: 13

Plasticoat

Well-known member
Pretty sure that’s just Glue.

not sure about a new/old replacement but I’m waiting on a response like you
 

Johnnya101

Well-known member
Have you resoldered any bad joints on the AB yet? Are you seeing any video flashing or jitters when it is crackling?
 

robin-fo

Well-known member
Have you resoldered any bad joints on the AB yet? Are you seeing any video flashing or jitters when it is crackling?
I didn‘t notice any bad joints (I’m refreshing some now during recapping of the AB)

The video is absolutely fine…
 

robin-fo

Well-known member
Pretty sure that’s just Glue.

not sure about a new/old replacement but I’m waiting on a response like you
But it still looks somehow suspicious, doesn’t it? There is another, similar tansformer on the AB without any traces of brown stuff coming out…
 

techknight

Well-known member
But it still looks somehow suspicious, doesn’t it? There is another, similar tansformer on the AB without any traces of brown stuff coming out…

it looks normal to me, and even if it was sus, lets hope its not because there is no fix. that transformer is specific to that analog board.
 
Top