glay78
Well-known member
I’ve got a Performa 578 board which is basically an LC575. I recapped it and did the software mod on my 7.6.1 it boots with chime but I get no display. The SCSI2SD reads and boots into system. I’ve did the system mods and tried 7.5.3 also gives me the same result.
I’m not in the direction to hard mod my analog board yet so am I doing the right things and how come I couldn’t get a display?
here’s what I did.
1. Copy my system file to Mac OS 9 on TiBook (I’m on system 7.6.1)
2. ResEdit it as what was taught changed gestald ID 99 boot process from 21 to 10.
3. Save it
4. Remove system file from my CC’s SCSI2SD
5. Replace system file
6. Blessed folder
7. Starts CC with LC575.
8. Chime and boot but screen is blank. It works but I got no output.
Any help?
I’m not in the direction to hard mod my analog board yet so am I doing the right things and how come I couldn’t get a display?
here’s what I did.
1. Copy my system file to Mac OS 9 on TiBook (I’m on system 7.6.1)
2. ResEdit it as what was taught changed gestald ID 99 boot process from 21 to 10.
3. Save it
4. Remove system file from my CC’s SCSI2SD
5. Replace system file
6. Blessed folder
7. Starts CC with LC575.
8. Chime and boot but screen is blank. It works but I got no output.
Any help?