• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

CC and FloppyEMU

Cinan

Well-known member
Potentially a silly question but how are people connecting their FloppyEMU to the Color Classics given the CC logic board doesn't have a DB19 connector exposed on the back ? I was going to connect the ribbon cable from the internal Floppy straight from the machine into the FloppyEMU after removing the ribbon cable but there isn't enough length in that cable to allow me to operate the FloppyEMU outside the machine.
 
I made an extension cable for it and connected it. I then converted it to Takky, so now I'm installing it on the back panel. I will upload the pic if I have time.
 
Top