A/UX 1.1.1 iso

[toshiba1]

Hi all, I have a Mac II with the FPU and PMMU so I know it can run A/UX,

I found an 'A/UX 1.1.1.iso' and I have this actually running properly in the emulator 'shoebill'. 

I have the SCSI2SD v5.1, and I used the 'dd' command to write the image to a 2GB SD card like this (see below). And you can see I can list the contents and it seems to be properly setup.

I place this SD card into the SCSI2SD and the Mac II boots into this SASH Standalone Shell Window. There are menus, like 'Boot' and 'Run', when I choose 'Boot' what happens is it shows this message (see picture attached) and just hangs.

Any advice?

gfs-powerbook-g4-59:~ gf$ dd if=Desktop/AUX_1.1.1.iso of=/dev/rdisk1

195912+0 records in

195912+0 records out

100306944 bytes transferred in 590.743029 secs (169798 bytes/sec)

gfs-powerbook-g4-59:~ gf$ diskutil list

/dev/disk0

   #:                   type name               size      identifier

   0: Apple_partition_scheme                    *74.5 GB  disk0

   1:    Apple_partition_map                    31.5 KB   disk0s1

   2:              Apple_HFS Tiger              74.4 GB   disk0s3

/dev/disk1

   #:                   type name               size      identifier

   0: Apple_partition_scheme                    *1.9 GB   disk1

   1:              Apple_HFS SASH Partition     2.0 MB    disk1s1

   2:    Apple_partition_map                    31.5 KB   disk1s2

   3:           Apple_Driver                    16.0 KB   disk1s3

   4:        Apple_UNIX_SVR2                    3.0 MB    disk1s5

   5:        Apple_UNIX_SVR2                    54.3 MB   disk1s6

   6:        Apple_UNIX_SVR2                    14.0 MB   disk1s7

   7:        Apple_UNIX_SVR2                    3.0 MB    disk1s8

 

[uyjulian]

Which graphic card are you using? Also, make sure you aren't using any ROM upgrades, such as BMOW's ROM-inator II.

 

[pcamen]

Anyone know where to get a fully installed shoebill VM with A/UX installed?  I’d love to play with A/UX but don’t have the patience to figure it all out myself.

 

[toshiba1]

Using a normal Macintosh color display card, and stock Mac II ROM. Nothing special.

 

[uyjulian]

Anyone know where to get a fully installed shoebill VM with A/UX installed?  I’d love to play with A/UX but don’t have the patience to figure it all out myself.

Try looking on Macintosh Garden.

Using a normal Macintosh color display card, and stock Mac II ROM. Nothing special.

Which specific card? "Macintosh II Video Card", "Macintosh II High Resolution Video Card", or a different one?

 

[toshiba1]

The video card has the text:

"1989/1990 Apple Computer"

"Macintosh Display Card"

"630-0400"

 

[toshiba1]

You guys are great =)  Thank you for asking about the video card!   I put my older "Macintosh II Video Card" into the Mac II and A/UX 1.1.1 boots up properly =)

By the way I obtained this .iso from https://winworldpc.com/product/a-ux/1x

Thank you very much!