Thanks for the response @Byrd, just given that a read, looks like a neat idea.
I've looked into the revisions, it would appear that both of these are Rev 2s, as the CMD chip is labled '646U2-402' as opposed to 'PCI646U2'.
I also tried putting the internal Zip over from the dead machine to the...
Hi all, quick question. I have a B&W G3 with the entry level 300mhz chip in it, and a parts donor with 400mhz chip with twice the L2 cache. Do I just need to switch the CPU card and the jumpers over to upgrade it or are the logic boards different and would require the whole board to be...
Hi all
I have a Quadra 610 with its install disks and would quite like to wipe the whole thing and do a fresh install of 7.1. Unless I've been looking in the wrong places, it doesn't look like it's install floppy has a disk utility app to wipe it so I'm curious to what the procedure is. Is...
Prices in the UK for these things seem to be fairly stable at the moment. A 800mhz TiBook in decent nick went for 80 quid recently and Pismos also seem to be between 80 and 90. AlBooks are ranging from 20 to 70, and no-one wants the white iBooks. I actually won one for 99p last month and...
Thanks for the link, thats really helpful. I'v pulled off the side now to have a look at the subwoofer thingy, gave it a bit of a clean, re-inserted the cable connecting it to the video in board, twisted the volume knob a lot, and now its working quite happily.
So i'v been using this machine for a wee while now, shifted the OS back down to 8.1 as I have enough systems running 9. A few interesting things have happened along the way.
I tried plugging a spare floppy drive into the floppy port, which stopped the machine getting past it's chime, bit of a...
These things usually do have regular stickers on them, i screenshotted the below from another ebay listing, i guess the distinguishes from NA ones is that these say 'assembled in ireland'.
Well the voltage that comes out of the walls here is 230v but there is still the option to knock it over to 110. Someone clearly didn't trust people not to fiddle with that switch, hence the note. I tried it once not really knowing what it did. It exploded.
The modem appears to be German as it...
A few days ago on eBay UK I won what I thought was a 6400, the seller didn't specify much, it was a low effort listing and there was no way of knowing if it would even work, it did, so £57 plus postage was a good price. It arrived yesterday and after taking it apart to dust it off, noticed it...
145 seems to equate to both 640x480 66hz, and Hi-Res 12-14". Not sure what the difference is but both are in in Composite Sync.
I was rather hoping I would be able to feed the signal into my capture card so that another monitor on the desk wasn't nececery, however it doesn't seem to be able...
Oh i see, its the converter itself. Thanks for that
Switches 1,4 and 5 are turned on, I'll have to wait to this eve to check what that means in it's guide.
Hi all
I got a IIsi today, its jolly nice and up and running, just finished the long runaround of finding and putting a copy of stuffit on it that isn't compressed with stuffit, thats always fun :/
I have it outputting to an LCD screen via a converter to VGA but im not entirely sure what its...
Hello
I have a 6200 with what I think is a borked power supply, as the logic board and hard disk are all ok when inserted into another one. Trying to turn it on makes the speaker pop faintly and holding the button down results in the noise happening every couple of seconds. Just wondering if...
I thought about that, but my Pismos which don't really differ from Lombards all that much, both boot to the last selected drive without a PRAM inserted. I removed them when they started preventing them from starting up at all
Ctrl+Apple+Power forces a reboot.
If your pressing and holding the power button without any response then I'd suggest that something is wrong. One other option is the reset switch between the VGA port and modem, the icon is a triangle in a circle.
The inability for it to remember the startup...
Hello
I've got a jaz drive sat around which sounds like it works, it spins a disk up and ejects and so fourth. Now I just need the right cable but im not having much luck finding anything confirming what sort of SCSI is on the back of it. Just from looking at pictures and going on what it looks...