Disk image worked! I had a PlayStation around to use to test, and found out the card only syncs to 480i, but not 240p. So it will capture the PS1 title screen in 480i, but when the game loads in 240p the capture is blank. Probably never expected people to want to capture 240p back in the...
Thanks guys. I will try out NIH image.
The links for the extension / plugins here don't appear to work for me
Also, if anyone has the original disk they can image let me know too.
Hey, I’ve got a Mass Microsystems Quickimage nubus card in my IIci. I can’t find the driver anywhere, does anyone have a disk they can upload?
Reference info
Thanks!
Simple, but did you check the battery cover switch is working? The symptoms you describe could also be due to the portable running off the 9V battery when unplugged instead of the main battery.
So I was able to get Crystal Quest to work by grabbing the latest version downloaded from Macintosh Repository.
Turns out SimFarm requires a 68020, oh well.
Hey all, I've got a recapped Powerbook 100. It works well but some games give an "Unimplemented Trap" type error. Specifically so far these 2 games don't work:
Sim Farm
Crystal Quest
I also tried on my backlit Portable and I get the same errors. So I assume it is not a hardware issue...
Hi, I just recapped a Mac Portable M5120 logic board. It has no sound to the internal speaker, the external jack works however. I found C9 (+) was not connect to pin 11 of the Sound Left Chip. C10 (+) was connected OK to Sound Right. I also found that the speaker (+) does connect to 2 leads...
4+ years and I’ve got your first reply! I was able to get an early P30 IIci Powercache working with Bolle’s adapter on an SE/30 using this hidden option. Without it, the computer instantly locks up when enabling the cache.
Maybe it’s some sort of compatibility mode?
Thanks, I was able to get everything to work by formatting the SD cards exFAT with MBR partition table. Then using a blank image file from Blue SCSI. All good now, just thought if I initialized on the Macintosh it would auto create the image files but it doesn’t work that way.
Hi, I have a Zuluscsi compact and a Zuluscsi mini. I initialized and partitioned each using the modded HDSC 7.5.3. They each work separately OK and they set themselves up at SCSI ID 1.
I'd let to use them both together, how do I change the SCSI ID for the mini? I figured I'd have to rename...
This was an official upgrade option. It even says on the board it’s an Apple part. Based on your serial number of #619, likely not a lot were manufactured.