I just got an unopened kit of the "Micro Courier" for Apple ///. Unfortunately, the two floppy disks seem to have issues, so I can't start the program.
Two questions:
- Does anyone have disk images of "Micro Courier"?
- Which program would you recommend to fix defective floppy disks...
Does anyone have a link to this file? VIMAGEPCCARD11.sit.hqx - I believe it's for this PC Card:
I noticed this thread here but could not find it in the archives mentioned there: https://68kmla.org/bb/index.php?threads/interware-device-software.32951/page-2#post-398670
After the recap of a Sony PSU for my SE/30, the Mac won't start-up (no chime, no fan). The analog board is known working. Here are the readings from the idle PSU:
I wonder why the -12V is so low. Any thoughts on that? Would adjusting "VADJ" at position 251 correct that or just increase it for...
After a recap of my Portable (backlit), it chimes but produces this error with and without the RAM module inserted:
00000003
0000FF00
Any thoughts what the issue could be?
- Chris
My Classic II has a recapped logic board and a known working analog board. Voltage measured on the floppy port is stable 4.98V and 11.95V. The Mac powers up when switched on (fan, disk spinning) but not boot chime. After two to three minutes, it suddenly chimes and works flawlessly.
Any...
The + pad of the C6 capacitor came off. I checked the logic board schematics and noticed it would connect to a resistor. However, that resistor does not have a lable. Does anyone know where the pad would connect to?
Source: Macintosh Classic II Schematic (bomarc).pdf
- Chris
I am looking for a replacement of my defective PSU for the TAM. Ebay lists PSUs with similar part numbers but I am not sure if these are also suitable for the TAM. The OEM part number is dps-150gb-1 A, that Apple part number is 614-0057.
What options are there to be used as a replacement from...
I've been trying to get the CFFA to work but my Apple /// does not see it. I double checked SOS.DRIVER to include the CFFA driver and that the slot number is correct. Jumpers 4 an 7 are set to "on" on the board.
Any other ideas what the issue could be?
My PB180c shows a white bar on the upper lower half of the display. Before I start with recapping: Any ideas what could cause this? I received it like this, haven't opened it, yet.
I am super excited that my Apple /// has arrived. It was gifted to me by an old work colleague of my fathers. They used to work at an insurance where they brought them with their own money to bring a modern policy management and risk engineering solution to their desks without having to use the...
I'm soon going to get an Apple /// and am thinking of adding a CF-card adapter/card into it. I found the CFFA3000 to be compatible for it. However, the documentation for the Drive/Turbo does not mention the Apple ///. Does anyone know why doesn't work on the ///?