I just got an unopened kit of the "Micro Courier" for Apple ///. Unfortunately, the two floppy disks seem to have issues, so I can't start the program.
Two questions:
- Does anyone have disk images of "Micro Courier"?
- Which program would you recommend to fix defective floppy disks...
Does anyone have a link to this file? VIMAGEPCCARD11.sit.hqx - I believe it's for this PC Card:
I noticed this thread here but could not find it in the archives mentioned there: https://68kmla.org/bb/index.php?threads/interware-device-software.32951/page-2#post-398670
Yes, idle = nothing connected. Thanks for pointing out the missing isolation foil. Adding it didn't change the voltage on the -12 rail.
Any other ideas what is going wrong? I should mention that the PSU was working fine before the recap.
After the recap of a Sony PSU for my SE/30, the Mac won't start-up (no chime, no fan). The analog board is known working. Here are the readings from the idle PSU:
I wonder why the -12V is so low. Any thoughts on that? Would adjusting "VADJ" at position 251 correct that or just increase it for...
After a recap of my Portable (backlit), it chimes but produces this error with and without the RAM module inserted:
00000003
0000FF00
Any thoughts what the issue could be?
- Chris
@jessenator I just noted that the caps C21 and C25 on the small board are of different capacity in my PSU. C25 is 10uF, C21 is 22uF. Minor detail but I thought it might be of interest to others.
- Chris
So, I measured the voltages as per the suggestions above. They were all within the specs. Both before the chime and after. However, I recapped the analog board. Now the Classic II boots right away. Problem solved. Thanks all for your help!