Hi!
A couple of weeks ago I started restoring a PowerBook with the typical issues: Bad caps on the display and stuck hard drive.
As usual, when I removed the front bezel and display, all the four supports crumbled into tiny pieces.
After seeing that glue doesn't always work and usually...
As I mentioned in another topic a while ago, I was able to obtain a broken TechStep and bring it back to operation by replacing an IC.
Well, Today another one Arrived!
I got it mainly because I wanted the bag and manuals, that unfortunately were missing with the broken one. I also got...
This is the third time that I found a board with this kind of issue, the same fix also works with board that produce low voltages at startup and ramp up as they heat up.
The Board in question is a 630-0560-240V. This is a 240V international board, but the same fix should work on the US ones...
(not sure if this the right place to post this, technically it's a conquest + repair)
Sometimes I go on eBay and search for "Crazy expensive Hard to find Items", such as the Apple TechStep.
As always, there were just a few units on sale, but one of them caught my eye: It was listed at 99$...
It seems like 2015 is the year of failing drives and stuck heads, I've made a very quick and rough video showing how to squeeze out some extra life from stuck drives. This trick also works on the bigger "brick" drives usually found in earlier macs like the SE ad SE/30. And also works on SCSI...
Hello!
I recently acquired a Macintosh Portable M5120, when I power it from a brand new (and charged) lead battery, it runs fine until it tries reading from the floppy drive or it spins up the hard disk, at this point the machine goes crazy: sometimes it will freeze, sometimes it will go in a...
Hello!
I recently scored three ED Macs, two Macintosh Plus EDs and a Macintosh ED (which is a 512ke).
The Mac ED only needed a quick reflow of the J1 connector.
The first Plus ED produced a very quick ticking noise no matter if the logic board was connected or not. I quickly noticed that the...
Hello
The Analog board is OK, I used another SE Board to test it and it works fine, I also installed the board in another SE/30 and it still shows the same issue: faint chime and no video (screen is totally black)
This seems to be a very early revision board, with the yellow-band capacitors...
Hello!
I recently scored a couple of PowerBook 540c, together with three power bricks!
When I plugged the first one, I heard a loud POP! noise coming from the power supply.
I decided to open it using the vise and and after desoldering the bottom shield, I quickly found out what happened...
Hi!
Yesterday I tried using a battery pack from a broken (dead GPU) HP DV9000 to power a PowerBook, using one of those cheap DC-DC Step-Down modules.
The battery supplied about 15.5 Volts, the module's output was set to 6.8 Volts and was plugged into the DC Jack of the PowerBook.
With a...
Hi!
Unfortunately school took away the free time I had during the summer, but now I'm (almost) back, thanks to the Christmas holidays!
I thought it would have been interesting to share my latest find in a video!
This past Sunday, I picked up 3 PowerMac G4s (they all have problems) and a...
Hello!
Finally decided to make a video about the display repair
there are also two capacitors on the inverter board:
33uf 10v
47uf 16v
let me know if it was useful or if you have any questions or suggestions!
http://youtu.be/XP-fWaDbv5s
Hello!
A friend of mine brought me a few Mac LCs and LC IIs to restore, this time I decided to record most of the electronics restoration, here I am replacing the ELNA Capacitors inside the PSU (with a bit of rambling on it)
Hopefully you will find the video entertaining and maybe useful...