Search results

yea they are nice systems. i have a 280Mhz G3 upgrade card in mine. i took the 6300cd case i have and i put a dual 1.7Ghz G4 quicksilver into it

yes you are correct. i did this when i was a kid back in the day with my X800 VIVO edition. thats the edition that had the yellow port. stands for video in/video out. the chips in this board were software disabled - same die as hte X850XTPE. this is the card i used in my G4 and it runs doom...

yea i put a quick silver in there. ill make a write up video some time this week

A rebuild on that performa. its got 1.5gb ram, 1.46ghz, and an 8500 radeon along side a 256gb dram ssd and blueray drive

a year in the making, lots of work. i could maybe squeeze a bit more out of it but for now... time to play some EV. or maybe halo...

wouldnt it be easier to just connect the rom chip to another computer via a flasher and dump it that way?

i do not own a 9000 but maybe i should buy one to try it out. i see some on ebay right now for 20 bucks

yea, i 3d modeled it roughly before i took the plunge making the front performa panel buttons work on the G4 board was a project: some work in layout: wiring in the new front speaker. dayton audio on a 50W class D amp in a ported fiberglass enclosure up front. custom power supply and...

just want to throw this out there - in my G4 performa build ive used a cheap class D 12v amp to peg off the headphone (line out) 3.5mm jack and amp a dayton audio speaker. you could use fiberglass to make a speaker enclosure in there and stick a small amp to it once you have that input. it...

just wanted to say that ive seen that on Nvidia cards as well. on mine it was a simple reball of the memory chips and they started working again. incase you still have yours - seems the solder joints break from heat cycles id guess?

i thought i would chime in with my QS - i have two of them now. got them a year ago and that was my first entry into this kind of mac. id had a performa as a kid but once windows 98 hit; i was a PC kid. so i have a 800mhz QS that came with an 8500 and 4 scsi drives. i havent used any...

ok, kool. im skimming ebay right now for g3 cpu's i may try swapping that 240mhz on the intergen for a 400mhz or so. we will see. im trying to find some 7455b cpu's for my qs right now. struggling.

ill give it a try next time i get it running. that 9200 only worked in my G4 with the DVI drivers. everything else locked up. im using quake 3 time demo to test. i think i have a 128 ssd in the 6360 i have not tried the different opengl versions, so that will be on my list. what happens is...

9.2.2

yea, i can see that. i wish i could get either the 7000 or 9200 working. right now im using the 9200 in a dual 1.3Ghz G4 with 150mhz bus. its a strong card on 10.5.9 and 9.2.2. it blows the AGP Geforce 2 out of the water. its nearly 75% the speed of a 8500 AGP radeon. which really surprised...

interware. its a 240. im not sure what the speed differences is from e603 to g3 at the same speed. i know newer instruction sets... we will see.

mine is not a sonet, its a j-a-pan something or other. ill have to just reverse engineer it a bit

ok, im going to order a 50mhz crystal to bump the bus. start there. then i have a G3 card that i need to figure out the clocks on. after that ill move onto the video card. in my G4 the 9200 tests pretty low in benchmarks for 2D BUT it handles 3D just fine. so i may try modding the extensions...

has anyone on here heard of overclocking the bus on the 6360? also has anyone successfully gotten the 9200 radeon to fully function with a G3 upgrade card? i never made that work on mine.

i just found something else. the VGA port does not load as primary in the OS. so you get a blank desktop on startup. teh DVI with VGA adapter will bring you to desktop (how i was running it) however - the DVI digital does not work. wont pickup on any of my screens so i need to figure out wth is...