I have a Performa 6290 that I intend on doing all the caps in eventually, and I want to start with the power supply. I don't know if they shipped with more than one model of PSU, but mine is the Dyna Corp DCF 704. Does anyone happen to have a list of capacitors for this and also a picture of the...
I have a Radius Accelerator for my Mac Plus but it does not work. I can see the large electrolytic cap bulging a bit on the bottom but there's a mark where it says the value so I can't tell if its 1000uf or 1800uf. There is also a tantalum cap that while not obviously bad I would like to...
I recently picked up a G3 PDQ without a charger and assumed it would work with my G4 charger but as I found out it's got a bigger plug. I'm trying to find the correct one with the larger power in plug, is it the M7332 or some other model?
Younger me was an idiot and I put the lower ROM of my CC in the wrong pins and fried the chip seemingly. I've since recapped the board but I'm not getting any display and I am assuming the ROM is dead. How would I go about programming a new set of ROMs for it or procuring a new set somewhat...
How would one go about taking apart a PB 520/540 adapter to fix? I just got one today but it is in need of repair and can't find any guides for it online.
I am in the process of recapping my Mac Plus' analog board but I ran into an issue finding a suitable capacitor for C1 (the 3.9uf 25v nonpolar cap). I ordered a 250v 3.9uf cap off Mouser but the leads turned out to be too short so If I bend them to the correct spacing they don't poke through...